Basic Operation - NEC LT157 User Manual

Basic Operation

Selecting the computer or video source:
Each time the Source button is pressed, the input source will change
as follows:
RGB ["DVI (DIGITAL) DVI (ANALOG)" on LT158]
If no input signal is present, the input will be skipped.
VIDEO S-VIDEO
On LT158:
Press the RGB 1 button on the remote control to select DVI digital
signal and the RGB 2 button for DVI analog signal.
SOURCE
AUTO
ADJUST
Video
PC Card Viewer S-Video
RGB1 RGB2
PC CARD
Source display
Optimizing RGB image automatically
Press the Auto Adjust button to optimize an RGB image automatically.
OFF
POWER
VIDEO S-VIDEO RGB1
AUTO ADJ.
S C
Press the Auto Adjust button to fine-tune the computer image or to
remove any vertical banding that might appear and to reduce video
noise, dot interference or cross talk (this is evident when part of your
image appears to be shimmering). This function adjusts the clock fre-
quencies that eliminate the horizontal banding in the image. This func-
tion also adjusts the clock phase to reduce video noise, dot interfer-
ence or cross talk. (This is evident when part of your image appears to
be shimmering.)
This adjustment may be necessary when you connect your computer
for the first time.
NOTE: The Auto Adjust function does not work for component signal.
E – 27
ON
SOURCE
RGB2
LASER
AUTO
ADJUST