Using Remote Mouse Receiver - NEC LT157 User Manual

Using Remote Mouse Receiver

The remote mouse receiver enables you to operate your computer's mouse functions from the remote control (Computer mode). It is a great
convenience for clicking through your computer-generated presentations.To return to the Projector mode, press the PJ button (lit red).
Connecting the remote mouse receiver to your computer
If you wish to use the remote mouse function, connect the mouse receiver and computer.
The mouse receiver can be connected directly to the computer using the USB terminal.
To connect it to the computer using the mouse (PS/2) terminal, do so using the PS/2 adapter.
NOTE: Depending on the type of connection or OS installed on your computer, you may have to restart your computer or change your computer settings.
Remote mouse receiver
When connecting using the USB terminal
For PC, the mouse receiver can only be used with a Windows 98,
Windows ME or Windows 2000 operating system.
NOTE:
• Wait at least 5 seconds after disconnecting the mouse receiver before re-
connecting it and vice versa. The computer may not identify the mouse re-
ceiver if it is repeatedly connected and disconnected in rapid intervals.
• When using the PS/2 adapter, be sure to attach the PS/2 adapter to the
remote mouse receiver first. Do not connect or disconnect the USB connec-
tor of the remote mouse receiver with the PS/2 adapter on the mouse (PS/2)
port of your PC. Doing so can result in your PC failing to detect the remote
mouse receiver.
Atach the supplied
PS/2 Adapter
When operating a computer via the remote mouse receiver
E – 14
Computer
To USB port of PC or
Macintosh
To Mouse (PS/2)
port of PC
7m
Remote sensor on the
remote mouse
receiver
30˚
30˚