Table of Contents
Advertisement
Chapter 2
Administration Setup
●
Outgoing Mail Server (SMTP)
DeÞne the network address of the SMTP server to be used.
●
Outgoing Mail Server Port
DeÞne the SMTP server port. This normally is set to 25.
●
Server Requires Authentication
When this is checked, the SMTP server requires messages sent to it to be authenticated to an account.
●
Authentication User Name
DeÞne the user name to use for the authentication.
●
Authentication Password
DeÞne the password to use for the authentication.
●
From Email Address
DeÞne the Email address displayed in the From Þeld on notiÞcations sent from the Aspire Conference
Bridge PCB.
●
Subject
Enter the subject line of the notiÞcations sent from the Aspire Conference Bridge PCB.
●
Message Introduction
Enter the introduction that is printed before the conference details.
●
Message Conclusion
Enter the conclusion that is printed at the end of the Email address.
Upon clicking Submit , a page is provided where the installer may send a test Email to the speciÞed To address to
verify that the Email settings are correct.
18 ◆
This must be entered every time the Email conÞguration is modiÞed when authentication is used.
Aspire Conference Bridge User Guide
Advertisement
Table of Contents
