Table of Contents
Advertisement
Advanced CD or MP3/WMA disc playback
n
Direct track search
By using the Direct Search buttons, the desired tracks
on the current disc can be played.
Use the Direct Search buttons on the remote control to
select the desired track whilst playing the selected disc.
• The Direct Search buttons allow you to select up to
number 9.
• When selecting number 10 or higher, use the "
button.
A. For example, to choose 13
1
Press the ">10" button once.
2
Press the "1" button.
3
Press the "3" button.
B. For example, to choose 130
1
Press the ">10" button twice.
2
Press the "1" button.
3
Press the "3" button.
4
Press the "0" button.
Notes
• A track number higher than the number of tracks on
the disc cannot be selected.
• During random play, direct search is not possible.
To stop playback:
Press the
(
CD/USB
n
Repeat play
Repeat play can play one track, all tracks or a
programmed sequence continuously.
To repeat one track:
Press the
PLAY MODE
One
" appears. Press the
To repeat all tracks:
Press the
PLAY MODE
All
" appears. Press the
To repeat desired tracks:
Perform steps 1 - 5 in "Programmed play" section on
this page and then press the
repeatedly until "
Repeat All
To cancel repeat play:
Press the
button repeatedly until "
PLAY MODE
appears and "
" disappears.
Selected track number
) button.
button repeatedly until "
/ (
CD/USB
/ ) button.
button repeatedly until "
/ (
CD/USB
/ ) button.
button
PLAY MODE
" appears.
n
Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Whilst in the stop mode, press and hold down
button on the remote control until "
MODE
appears. Press the
To cancel random play:
Press the
Notes
• If you press the
can move to the track selected next by the random
operation. On the other hand, the button does not
allow you to move to the previous track. The
beginning of the track being played will be located.
• In random play, the unit will select and play tracks
"
>10
automatically. (You cannot select the order of the
tracks.)
CAUTION
After performing repeat play, be sure to press the
(
CD/USB
continuously.
n
Programmed play (CD)
You can choose up to 32 selections for playback in the
order you like.
1
Whilst in the stop mode, press the MEMORY button
on the remote control to enter the programming
save mode.
2
Press the
to select the desired track.
Repeat
3
Press the MEMORY button to save the track number.
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks
Repeat
can be programmed.
If you want to check the programmed tracks, press
the
MEMORY
mistake, the programmed tracks can be cleared by
pressing the
5
Press the
playback.
"
Normal
13
/ (
CD/USB
(
) button.
CD/USB
button during random play, you
) button. Otherwise, the disc will play
or
button on the remote control
Selected track number
button repeatedly. If you make a
button.
CLEAR
/ (CD/USB
/ ) button to start
PLAY
"
Random
/ ) button.
Hide quick links:
Advertisement
Table of Contents
