Storage - Beem DYNAMIC i-POWER User Manual

Hide thumbs Also See for DYNAMIC i-POWER:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 19
EN

Storage

If you do not intend to use the appliance
for a longer period of time, clean it as de-
scribed in the Cleaning and care section.
Allow the appliance to cool down com-
pletely before storing.
Store the appliance in an upright position,
not on the ironing sole.
Store the appliance and all accessory
parts at a dry, clean and frost-free loca-
tion, which is protected against direct
sunlight.
Cleaning and care
Before beginning work, pay attention to
the safety instructions in the section on
safety!
Ironing sole
Clean the ironing sole with a soft damp
cloth. Subsequently wipe with a soft
dry cloth.
Self-cleaning function
Self-cleaning function
Regularly perform (at least after every
10 hours of use) the following work steps
described.
Turn the steam flow regulator (3) to
position 0.
Set the temperature regulator (13) to
the "OFF" position.
Pull the plug out of the mains socket.
BEEM - Elements of Lifestyle
DYNAMIC i-POWER
Fill the water tank (12) up to about
a half with water as described in the
Filling with water section. It is rec-
ommended only to use distilled water
for self-cleaning.
Insert the plug of the appliance into
the mains socket. The control indica-
tor (11) light ups.
Turn the temperature regulator (13) to
the "MAX" position.
The temperature indicators (9) light up
on both sides of the appliance during
heat-up.
Wait until the appliance has heated
up, the control indicator (11) flashes
and the temperature indicators extin-
guish.
Set the temperature regulator (13) to
the "OFF" position.
Pull the plug out of the mains socket.
Hold the appliance horizontally over a
wash basin or similar.
Press the self-clean button (15).
Allow the the water tank to empty
completely. Lightly tilt the appliance
back and forth so that the water can
run out of all nozzles.
Repeat the cleaning procedure as
often as necessary until no calcium
deposits come out of the nozzles.
If necessary, briefly switch on the ap-
pliance to allow residual amounts of
water to evaporate.
NOTE
It is not necessary to decalcify the
appliance separately.
25

Advertisement

Table of Contents
loading

Table of Contents