NOTE C. when you supply the electric power to the outdoor housing, you should connect the lines
between outdoor housing and dome camera using terminal block. Please refer to the picture below.
There is a bimetal implemented in the outdoor housing for controlling the fan and heater. Refer to its
specification below for more details.
Bimetal for
Activation
35°C‐OFF / 45°C‐ON
Part Number
R45
Package
DIP Type
Maker
Korea Bitec
Circuit Board
Con1 Con2
<Outdoor Housing>
Fan
<Bottom of Dome Camera>
Terminal Block
AC24V ADAPTOR
Heater
15°C‐OFF / 5°C‐ON
N10
DIP Type
Korea Bitec
NM‐IP4500
30