PRECAUTIONS PRECAUTIONS 1. Do not attempt to disassemble the camera. There are no user serviceable parts inside. Ask a qualified service person for servicing 2. Handle the camera with care. Do not misshandle the camera. Avoid striking, shaking, etc. Improper handling or storage could damage the camera.
FEATURES AND FUNCTIONS Auto Light Control (ALC) function Electronic Light Control (ELC) function Automatic Gain Control (AGC) function Automatic Tracing White Balance (ATW) function Internal Synchronisation Minimum Illumination of 1 Lux @ F2.0 Signal to noise ratio > 45 dB (AGC off) Horizontal resolution of 480 TV lines.
INSTALLATION 1. Power connection Connect the DC 12V powercable with the + 12V- and GND Terminal. + 12V = +12V DC (±10%) GND = GND - Power + CVBS Shield CVBS = CVBS Signal NC = No Connection In addition to use the screw terminal you can connect the Adapter cable to this terminal and then you can connect power by NES Plug and the video signal by BNC Plug.
Page 7
l Resistance of copper wire (at 20 °C) Copper 0,22 mm² 0,33 mm² 0,52 mm² 0,83 mm² wire size 0,078 0,05 0,03 0,018 W / m Calculation of max. cable length between camera and power supply: 10,5V DC £ V – (R x 0,42 x L) £ 16V DC L : Cable length (m) R : Resistance of copper wire (W / m) V : DC output voltage of power supply (V DC)
2. Video cable l It is recommended to use a monitor with a resolution at least equal to that of the camera. l Connect the Video cable with the CVBS and GND Terminal. + 12V = +12V DC (±10%) GND = GND - Power + CVBS Shield CVBS = CVBS Signal NC = No Connection In addition to use the screw terminal you can connect the Adapter cable to...
Page 9
The max. extensible coaxial cable length between camera and the monitor is shown below. Coax cable type RG-59/U RG-6U RG-11/U RG-15/U (3C-2V) (5C-2V) (7C-2V) (10C-2V) Recommended max. cable length (m) Page : 9...
3. View angle and focus Adjustment Open the Dome Cover to adjust the angle of view (Zoom) and focus To adjust focus and the viewing angle (Zoom) you have to loosen the adjustment lever by turning left, afterwards you can slide the adjustment lever right and left.
Power Consumption Operating Temperature Operating Humidity Dimensions (W x H x D mm) 151 mm Æ Mounting Ring Weight (without Lens) Approvals BDC4803VFD f : 4 – 8 mm 1/3” Super HAD CCD 2:1 Interlaced H: 15.625 kHz V: 50 Hz 795 (H) x 596 (V) app.