Connecting To An Existing Wifi Network(Public Wifi) - Sapido RB-1602 Quick Installation Manual

Connecting to an Existing WiFi Network (Public WiFi) :
It can be configured without Internet.
Switch the operation mode to "R".
1. Open IE browser, type IP 192.168.1.1(P.1), or open
"My Network Place", and click SAPIDO_RB-1632(P2).
192.168.1.1
(P1)
3. Select "One Button Setup"(P4) on the left menu.
4. Select "WAN Interface" is Wireless. Choose the network you would like to connect, then select the encryption
type and fill the encryption key. Select your "WAN Access Type" according to your Internet source, and
starts to setup the wireless encryption.
5. After the setting is finished, you should see a "change successful" page with countdown. When the
countdown is completed, your wireless network and security will be active,and you should be able to
login immediately with the new password. However,if an error message shows up,please refresh the
page and it will go back to the entering page. Afterwards, you can access Internet.
2. Fill in default Username and Password
to login(P3).
SAPIDO_RB-1632
(P2)
admin
admin
(P3)
(P4)
16