Table of Contents
Advertisement
Connecting this Router to a WiMAX modem :
(RB-1602/MB-1112 are not supported)
Switch the operation mode to "R".
※We suggest using WiMAX modem with a USB extended cable for the best performance.
※Please find update support list at SAPIDO official website.
1.
Open IE browser, type IP 192.168.1.1(P.1), or open
"My Network Place", and click SAPIDO_RB-1632(P2).
192.168.1.1
(P1)
3.
Select "One Button Setup"(P4) on the left menu.
4.
Select "WAN Interface" is WiMAX, and starts the setup and
wireless encryption.
5.
After the setting is finished, you should see a "change successful"page with countdown When the
countdown is completed, your wireless network and security will be active, and you should be able
to login immediately with the new password.However,if an error message shows up,please refresh
the page and it will go back to the entering page. Afterwards, you can access Internet.
It can be configured without Internet.
2.
Fill in default Username and Password
to login(P3).
SAPIDO_RB-1632
(P2)
14
admin
admin
(P3)
(P4)
Hide quick links:
Advertisement
Table of Contents
