Technical Data - AKG C414 XLS User Instructions

TecHNIcAL dATA

6 Technical data
Type:
Palar patterns:
Open‑circuit sensitivity:
Frequency range:
Impedance:
Recommended load impedance:
Bass cut filter slope:
Preattenuation Pads:
Equivalent noise level to IEC 60268‑4:
Equivalent noise level to IEC 60268‑4
(A‑weighted):
Signal/noise ratio re 1 Pa (A‑weighted):
Max. SPL for 0.5% THD:
Dynamic range (A‑weighted):
Max. output level (A‑weighted):
Environment:
Powering:
Current consumption:
Connector:
Dimensions:
Net weight:
Patents:
This product conforms to the standards listed in the Declaration of Conformity. You can request the Declaration of Conformity
by e‑mail from sales@akg.com.
46
1‑inch large diaphragm pressure gradient microphone
9, selectable
23 mV/Pa (‑33 dBV ± 0.5 dB)
20 to 20,000 Hz (see frequency response graphs)
≤ 200 ohms
≥2200 ohms
12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
‑6 dB, ‑12 dB, ‑18 dB (selectable)
20 dB (0 dB preattenuation)
6 dB(A) (0 dB preattenuation)
88 dB
200/400/800/1600 Pa
140/146/152/158 dB SPL
(0/‑6/‑12/‑18 dB preattenuation)
134 dB min.
5 V rms (+14 dBV) (+14 dBV)
temperature: ‑10°C to +60°C
R. H.: 95% (+20°C), 85% (+60°C)
48 V phantom power to IEC 61938
approx. 4.5 mA
IEC standard 3‑pin XLR
50 x 38 x 160 mm / 2.1 x 1.7 x 6.3 in.
300 g / 10.2 oz.
Electrostatic transducer (patents nos. AT 395.225, DE 4.103.784,
JP 2.815.488, US 7,356,151)
C414 XLS / C414 XLII MANUAL