NEC MultiSync LCD4215 Installation Manual
NEC MultiSync LCD4215 Installation Manual

NEC MultiSync LCD4215 Installation Manual

42” lcd display
Hide thumbs Also See for MultiSync LCD4215:

Advertisement

LCD4215 Installation Guide
42" LCD Display
Contents:
Table Top Stand Dimensions

Product Description

Type:
LCD Display
Resolution:
1366 x 768
Aspect Ratio:
16:9
FCC:
Class B
Power Consumption: 190W (max)
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.

Tilt Angle and Rotation

Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
www.necdisplay.com
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Screen Surface: Anti-Reflective
Dimensions:
Weight:
BTU's:
Max. 20 deg
LCD4215
40.3"(W) x 24.2"(H) x 5.2"(D)
47.6 lbs
648 BTU/hour
Page 1 of 9
Rev 1.0

Advertisement

Table of Contents
loading

Summary of Contents for NEC MultiSync LCD4215

  • Page 1: Table Of Contents

    Distances may vary ±5%. Tilt Angle and Rotation Below are the maximum angles that the monitor can be tilted in the landscape position only. Landscape 20deg www.necdisplay.com NEC Display Solutions of America, Inc. Page 1 Page 1 Page 2 Page 3...
  • Page 2: Ventilation Requirements

    NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.
  • Page 3: Display Dimensions

    NEC Display Solutions of America, Inc. LCD4215 Installation Guide 42” LCD Display Rev 1.0 Display dimensions (PANEL DISPLAY AREA) www.necdisplay.com LCD4215 Page 3 of 9...
  • Page 4: Rear & Bottom

    NEC Display Solutions of America, Inc. LCD4215 Installation Guide 42” LCD Display Rev 1.0 Display dimensions (cont.) 100mm MOUNTING HOLE PATTERN Power Switch www.necdisplay.com LCD4215 Page 4 of 9...
  • Page 5: Display Dimensions W/Optional Speakers And Stand

    NEC Display Solutions of America, Inc. LCD4215 Installation Guide 42” LCD Display Rev 1.0 Dimensions with optional speakers and stand www.necdisplay.com LCD4215 Page 5 of 9...
  • Page 6 LCD4215 Installation Guide 42” LCD Display Table Top Stand Dimensions (ST-4020) 3.52 4.94 www.necdisplay.com 3.48 0.83 0.69 13.00 NEC Display Solutions of America, Inc. Table Top Stand ST-4020 0.83 LCD4215 Rev 1.0 Page 6 of 9...
  • Page 7: Optional Speaker Dimensions

    NEC Display Solutions of America, Inc. LCD4215 Installation Guide 42” LCD Display Rev 1.0 Optional Speaker Dimensions (SP4020-4620) Optional Speakers SP4020-4620 0.79 www.necdisplay.com LCD4215 Page 7 of 9...
  • Page 8: Dimensions Optional Wall Mount

    NEC Display Solutions of America, Inc. LCD4215 Installation Guide 42” LCD Display Rev 1.0 Dimensions with optional Wall Mount Kit (WMK3260-L) www.necdisplay.com LCD4215 Page 8 of 9...
  • Page 9: Control Codes

    SCREEN MODE: NORMAL FULL WIDE ZOOM AUTO SETUP EXECUTE FILM MODE AUTO NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Cable Connection Communication Protocol: Interface: RS-232C Communication: Asynchronous Baud Rate: 9600 bps Data Length:...

Table of Contents