NEC LCD4620-2 Installation Manual
NEC LCD4620-2 Installation Manual

NEC LCD4620-2 Installation Manual

46” lcd display

Advertisement

Quick Links

LCD4620-2 Installation Guide
46" LCD Display
Contents:

Product Description

Type:
LCD Display
Resolution:
1366 x 768
Aspect Ratio:
16:9
FCC:
Class B
Power Consumption: 235W (max)
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.

Tilt Angle and Rotation

Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
www.necdisplay.com
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Screen Surface: Anti-Reflective
Dimensions:
Weight:
BTU's:
Max. 20 deg
LCD4620-2
41.6"(W) x 24.0"(H) x 5.5"(D)
79.6 lbs
802 BTU/hour
Page 1 of 9
Rev 1.0

Advertisement

Table of Contents
loading

Summary of Contents for NEC LCD4620-2

  • Page 1: Table Of Contents

    Distances may vary ±5%. Tilt Angle and Rotation Below are the maximum angles that the monitor can be tilted in the landscape position only. Landscape 20deg www.necdisplay.com NEC Display Solutions of America, Inc. Page 1 Page 1 Page 2 Page 3...
  • Page 2: Ventilation Requirements

    NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.
  • Page 3: Display Dimensions

    NEC Display Solutions of America, Inc. LCD4620-2 Installation Guide 46” LCD Display Rev 1.0 Display dimensions 9Pin D-Sub (RS232) www.necdisplay.com LCD4620-2 Page 3 of 9...
  • Page 4: Rear & Bottom

    NEC Display Solutions of America, Inc. LCD4620-2 Installation Guide 46” LCD Display Rev 1.0 Display dimensions (cont.) 100mm MOUNTING HOLE PATTERN AC Inlet Power Switch www.necdisplay.com LCD4620-2 Page 4 of 9...
  • Page 5: Display Dimensions W/Optional Speakers And Stand

    NEC Display Solutions of America, Inc. LCD4620-2 Installation Guide 46” LCD Display Rev 1.0 Dimensions with optional speakers and stand www.necdisplay.com LCD4620-2 Page 5 of 9...
  • Page 6: Optional Table Top Stand Dimensions

    LCD4620-2 Installation Guide 46” LCD Display Optional Table Top Stand Dimensions (ST-4620) www.necdisplay.com NEC Display Solutions of America, Inc. Table Top Stand ST-4620 LCD4620-2 Rev 1.0 Page 6 of 9...
  • Page 7: Optional Speaker Dimensions

    NEC Display Solutions of America, Inc. LCD4620-2 Installation Guide 46” LCD Display Rev 1.0 Optional Speaker Dimensions (SP4020-4620) Optional Speakers SP4020-4620 0.79 INPUT TERMINAL www.necdisplay.com LCD4620-2 Page 7 of 9...
  • Page 8: Optional Wall Mount Dimensions

    NEC Display Solutions of America, Inc. LCD4620-2 Installation Guide 46” LCD Display Rev 1.0 Dimensions with Optional Wall Mount Kit (WMK3260-L) www.necdisplay.com LCD4620-2 Page 8 of 9...
  • Page 9: Control Codes

    SCREEN MODE: NORMAL FULL WIDE ZOOM AUTO SETUP EXECUTE FILM MODE AUTO NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Cable Connection Communication Protocol: Interface: RS-232C Communication: Asynchronous Baud Rate: 9600 bps Data Length:...

This manual is also suitable for:

Lcd4620-2-it - multisync - 46" lcd flat panel display

Table of Contents