2. Drain the reservoir completely using the Fig. 1 Main components hot–water modules draw–off tap. 1. ON/OFF switch The module is now ready for use. operating panel pouring opening descaler 4. draw–off tap 5. condensation outlet ECopyright Bravilor Bonamat B.V. version...
Page 4
1. Place a cup or jug under the tap and pull the handle forward. – The tap can be locked in the open position by pushing the handle fully away from you against the spring pressure. ECopyright Bravilor Bonamat B.V. version...
Page 5
29. Press the [–] button (B.) for 30 seconds to on the display will stop flashing). reset the descaling signal to zero. 13. Switch off the module. 14. Remove the plug from the pouring opening (2.). ECopyright Bravilor Bonamat B.V. version...
Page 6
Reset the system afterwards: set the ON/OFF switch to the off position and then switch it on again. Call in service. Temperature sensor is loose or broken. Switch the ON/OFF switch off. Call in service. ECopyright Bravilor Bonamat B.V. version...
Need help?
Do you have a question about the RLX series and is the answer not in the manual?
Questions and answers