Update Automatically (Automatic Firmware Update By Network); What Is Automatic Firmware Update By Network - Cocktail Audio X30 Manual

5-9-3. Update automatically (Automatic Firmware Update by network)

※ Default : ON

5-9-4. What is Automatic Firmware Update by network?

This function is available only when X30 is connected to a network (internet). In the instance that
a higher version of the firmware exists at our server system, your X30 will check it automatically
when the X30 boots up.
※ If OK is selected the X30 will try downloading and extracting it automatically. The X30 will
reboot automatically to update the firmware, see sequence below:
The X30 will automatically update the
firmware through the network. If you don‟t
wish this done automatically you can
change the setting to OFF, see left.
※ NOTE: If CANCEL is selected, the folder [New Firmware]
is created automatically in the internal hard disk (or USB),
then the X30 will not ask for a Firmware Update when
booting up. If you delete [New Firmware] through Browser,
it will ask again.
※ NOTE: There is no actual data in the [New Firmware]
folder.
39