Equalizer (Preset Eq And Custom Eq); Digital Out; Speaker Out - Cocktail Audio X30 Manual

5-3-2. Equalizer (Preset EQ and Custom EQ)

You can set one of the following; Normal → Classical→ Club → Concert Hall → Dance → Live
→ Party → Pop → Reggae → Rock → Soft → Soft Rock → Techno → Bass → Bass & Treble
→ Treble → Vocal → Custom EQ → Normal
※ NOTE: During playing, you can also change preset EQ using Preset EQ button. For custom
equalizer setting, press EQ button of remote control.
[ Preset EQ. ]
※ NOTE: For more detailed explanation, refer to the 19-7 Preset EQ and 19-8 Custom EQ (Page
21)

5-3-3. Digital Out

You can set one of five (5) options like OFF, Passthrough, 48KHz, 96KHz and 192KHz
※ Default : 96KHz

5-3-4. Speaker Out

You can set as ON or OFF here.
※ Default : ON
① Select Equalizer and confirm it with OK key to open the
preset EQ list like below.
② Select one of 18 options
※ NOTE: Equalizer works in Speaker Out (in-built amplifier) only.
[ Custom EQ ]
1) OFF : No signal from Digital Out
2) Pass-through : Original resolution(Frequency)
3) 48Khz : Max 48KHz frequency
4) 96Khz : Max 96KHz frequency
5) 192Khz : Max 192KHz frequency
When you want to use the amplifier of the X30, the
speaker out should be set as ON
21
[ Preset EQ + Custom EQ ]