5-3-5. Line Out (Analog Out)
ON or OFF can be set here
※ Default : ON
5-3-6. DRC (Dynamic Range Compression)Mode
※ NOTE: DRC Mode works in Speaker Out mode only.
5-3-7. Recording Sample Rate
※ Default : 96Khz
5-3-8. Gapless Play
The X30 supports gapless playback function for MP3 files, WAV and FLAC files only.
【 TIP 】
※LAME-encoded MP3 files only supported
※The Gapless play function works properly on „Repeat All‟ and „Normal‟ modes only. For example
in „Shuffle‟ mode Gapless play is not supported
In case that you want to use an external amplifier,
the line out (Analog Out) should be set as ON, and
the external amplifier should be connected to the
line out (analog out) at the rear of the X30.
When you record by X30, you can set Recording Sample Rate
by one (1) of three (3) options like 48KHz, 96KHz, 192KHz.
※ NOTE: The higher sample rate, the more recording space is
needed.
22
※ Default : ON
※ Default : ON