Operations In The Picture-In-Picture Mode; Selecting The Input Signals To Be Displayed; Zooming Up Pictures; Adjusting The Osm Controls - NEC Plasma Monitor Operation Manual

Operations in the Picture-in-picture mode

To move the position of the sub screen, press the cursor
or button.
A
VIDEO1 RGB/PC2
B
Top Left
button button
VIDEO1 RGB/PC2
B
A
Bottom Left
To change the size of the sub screen, press the
VIDEO1 RGB/PC1
B
A
VIDEO1 RGB/PC1
B
A
button
VIDEO1
A
button
button
To make the desired picture active, press the ACTIVE
SELECT button.
VIDEO1 RGB/PC1
B
ACTIVE
A
SELECT
button
button
A
VIDEO1 RGB/PC2
B
button
Top Right
button button
button
VIDEO1 RGB/PC2
B
A
button
Bottom Right
button.
RGB/PC1
B
VIDEO1 RGB/PC1
B
A
button
VIDEO1 RGB/PC1
B
A

Selecting the input signals to be displayed

1. Press the ACTIVE SELECT button to make the desired
picture active.
2. Press the PC/RGB, VIDEO1, 2, 3, or DVD/HD1, 2, 3
button to change the selection of the input signal.
The INPUT SELECT button on the monitor can also be
used to change the selection.

Zooming up pictures

1. Press the ACTIVE SELECT button to make the desired
picture active.
2. Use the ZOOM (
For details, see "DIGITAL ZOOM" on page 11.

Adjusting the OSM controls

1. Press the ACTIVE SELECT button to make the desired
picture active.
2. Press the MENU/ENTER button to display the MAIN
MENU.
3. Adjust the setting to your preference.
For details, see "OSM (On Screen Menu) Controls" on
page 16.
Note:
During enhanced split screen, some functions of OSM
controls are not available.
15
or ) button to enlage the picture.