Interrupting A Programme And Changing The Options; Cancelling A Running Programme - Zanussi ZWD 71460 NW User Manual

Table of Contents

Advertisement

The programme starts, the door locks, the
display shows the indicator
The drain pump can operate for a short time
when the appliance fills water.
After approximately 15 minutes from
the start of the programme:
The appliance adjusts automatically
the programme duration agree with
the laundry load.
The display shows the new value.
STARTING A PROGRAMME WITH THE DELAY
START
1. Press
again and again until the display
shows the delay you want to set.
The related indicator comes on the display.
2. Press
:
The appliance starts the countdown.
The door locks, the display shows the
indicator
.
When the countdown is completed, the
programme starts automatically.
You can cancel or change the set of
the delay start before you press the
. To cancel the delay start:
Press
to pause.
Press
shows
Press
programme immediately.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before they
operate.
1. Press
.
The indicator flashes.
2. Change the options.
3. Press
again.
The programme continues.

CANCELLING A RUNNING PROGRAMME

1. Turn the programme knob to position
cancel the programme and to deactivate the
appliance.
.
to set the appliance
until the display
'.
again to start the
to
2. Turn the programme knob again to activate the
appliance. Now, you can set a new washing
programme.
Before starting the new programme
the appliance could drain the water. In
this case, make sure that the detergent
is still in the detergent compartment, if
not fill the detergent again.
OPENING THE DOOR
CAUTION! If the temperature and
level of the water in the drum are too
high and the drum still rotates, you
cannot open the door.
While a programme or the delay start operates, the
appliance door is locked and the display shows the
indicator
.
Open the appliance door when the
programme or the delay start operates:
1. Press
to pause the appliance.
2. Wait until the door lock indicator
3. Open the door.
4. Close the door and press again
The programme or delay start continues to operate.
AT THE END OF THE PROGRAMME
The appliance stops automatically.
The acoustic signal operates (if it is activated).
In the display
comes on.
The indicator of the
The door lock indicator
You can open the door.
Remove the laundry from the appliance. Make
sure that the drum is empty.
Close the water tap.
Turn the programme knob to position
deactivate the appliance.
Keep the door ajar, to prevent the mildew and
odours.
The washing programme is completed, but
there is water in the drum:
The drum turns regularly to prevent the creases
in the laundry.
The door lock indicator
flashes. The door stays locked.
You must drain the water to open the door.
To drain the water:
goes off.
.
goes off.
goes off.
to
is on. The indicator
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents