6.1 DVD ADJUSTMENT
[BAND] + [ENT] + Reset
DVD source ON
MG4 test mode
FE test mode
Note)When you turn off Acc in a static test mode,
please be sure to check that the mechanism has stopped.
"LEFT" of remote controller
"1" of remote controller
"2" of remote controller
"3" of remote controller
"4" of remote controller
"5" of remote controller
"6" of remote controller
The *EJECT key is displayed as the touch key by pressing OPEN key to shift to LOAD/EJECT screen.
It is possible to eject by directly specifying the disc (other than the disc which is being clamped), however,
it is possible to eject it only in the built-in DVD source. Furthermore, if you execute the current eject,
the source is not turned OFF.
In the test mode, take care of the following.
- The information of each disc is not updated.
LOAD/EJECT screen, type of each media of source menu, existence of disc do not change if you execute eject
or reload. Furthermore, the icon that shows the media of information plate maintains the content when it is reset.
If the mode is shifted to test mode when there is no disc, every 6 keys in source menu cannot be pressed, and it
does not change if you insert the disk, so the MG4 can be turned ON only by the toggle by pressing source key.
- The animation in LOAD/EJECT screen does not operate.
- When turning OFF the built-in DVD source, the mechanism is initialized and operates.
The test mode is released by AccOFF, however, as the MG4 implements the initialization, the operation does not
return to the normal operation (as a product) till the operation is terminated.
EDC1 test mode
Command for Test Mode: 1
Command for Test Mode: 2
Command for Test Mode: 3
Command for Test Mode: 4
Command for Test Mode: 5
Command for Test Mode: 6
Command for Test Mode: 7
Command for Test Mode: 8
Disc direct eject
EDC2 test mode