Tp Coordinates Test - Pioneer AVH-P6800DVD Service Manual

1

3. TP coordinates test

[Outline]
A
• Coordinate before and after the correction when the touch panel is touched is displayed, and the operation is verified.
Furthermore, the cursor can be moved by using the up/down/left/right keys, and the coordinate of the cursor center
is displayed.
The cursor is displayed in red at the positions where the cursor was displayed during 16 points adjustment.
[Display specifications]
B
C
• POSITION : XY coordinate of the + cursor (movable) is displayed.
Operational range is (0, 0)~(480, 240).
• AD : AD data value (X direction, Y direction), representing the coordinate of the point pressed, is displayed.
• VD E2P : VD value (the value registered at the time of circumference setting) preset in the E2PROM.
VD : VD value currently being pressed.
• NORMAL : The coordinate (X direction, Y direction), which is the result of normalizing the AD data value currently
D
being pressed within the effective range, is displayed.
• CALIBRATION : The coordinate (X direction, Y direction), which is the result of applying the correction by calibration
to the normalized coordinate, is displayed.
• "+" displayed in the 16 points adjustment is displayed in red.
• Movable "+" is displayed in white.
[Key operation specifications]
E
Operational
description
To TOP menu
Cursor upward
movement
Cursor downward
movement
Cursor leftward
movement
F
Cursor rightward
movement
152
1
2
Main unit key Remote controller
key
BAND MENU_ENTER
VOL UP
VOL DOWN
TR DOWN
TR UP
AVH-P6800DVD/UC
2
3
Remote controller
key code
AD19AF63
AD40
AD41
AD42
AD43
3
4
Display is
made in HEX.
4