Replacing The Front Panel And Eject Button - Sony MPF920-Z User Manual

Replacing the
Front Panel and
Eject Button
Front panels and eject buttons in alternate
colors (granite and mat black) are
included for use with different computer
case colors. If you want, replace the
standard mist white front panel and eject
button with one of the replacements, as
follows.
1
Holding the drive face front,
gently pull the right side of the
front panel as illustrated, then
remove the panel.
GB
8
2
To remove the eject button, pull
out the eject button.
To insert the eject button, align the
eject button with the pin and push it
until it is fully inserted.
Note
Make sure that the eject button is in
place before replacing the front
panel.
3
Install the new front panel (left
side first, as illustrated), and then
push the right side until you hear
a click.