Blind Panel Replacement; Installation; Led Mounted Board Ass'y Replacement - Sony OA-D32W Service Manual

Blind Panel Replacement
4-3. BLIND PANEL REPLACEMENT
4-3·1. Removal
a. Remove the front panel ass'y. (Refer to 4-2)
b. Remove the blind panel by twisting it into the
arrow while pressing its both edges. (Refer to Fig.
4-3)
4-3·2. Installation
a. Press the blind panel toward the cassette-up ass'y
and latch the two tabs onto the disk holder.
(Refer to Fig. 4-3)
b. Install the front panel ass'y. (Refer-to 4-2)
Fig. 4·3 Blind Panel Replacement
4-4. LED MOUNTED BOARD ASS'V
REPLACEMENT
4-4·1. Removal
a. Remove both the FC-9/FC-14 Mounted Board and
shield plate. Disconnect CN 102 connector.
(Refer to Fig. 4-4 (a) )
b. Remove the front panel ass'y. (Refer to 4-2)
c. Remove the LED Mounted Board ass'y from the
chassis ass'y.
4-4·2. Installation
a. Peel off remover from the cushion and set the
LED Mounted Board as shown in Fig. 4-4 (b).
b. Install both the FC-9/FC-14 Mounted Board and
shield plate. (Refer to 4-1)
c. Install the front panel ass'y. (Refer to 4·2)
PS2.6x 10
LEO Mounted Board Ass'y
(aJ
REO
BLK
(bJ
Fig. 4·4 LED Mounted Board Ass'y Replacement
-30-