General Information; Solution 3.4 Specifications - Enerzone Solution 3.4 Installation And Operation Manual

2

General Information

2.1 Solution 3.4 Specifications

Fuel Type
Test Standards (safety)
Test Standard (emissions)
Heating capacity range*
Maximum heat output**
(EPA test fuel)
Maximum heat output**
(natural hardwood fuel)
Optimum efficiency
Particulate Emissions
Test Standard (efficiency)
Burn Time*
Shipping Weight
Firebox Volume
Maximum Log Length
Flue Outlet Diameter:
Baffle Material
Mobile home approved
* Burn time and heating capacity may vary subject to location in home, chimney draft, chimney
diameter, locality, heat loss factors, climate, fuels and other variables.
** The EPA test fuel is dimensional Douglas fir pieces stapled together into cribs with air spaces
between. We also test using the same procedure except using split hardwood firewood to reflect
real-world heat output. This stove is not intended to operate at its peak heat output continuously.
*** East-west: through the door you see the sides of the logs; north-south: through the door you
see the ends of the logs.
Solution 3.4 Installation and Operation Manual
Cordwood
ULC S627 and UL 1482
EPA Method 28 (40 CFR Part 60)
1,000 to 2,700 sq. ft. (93 to 251 m
60,175 BTU/h (17.64 kW/h)
100,000 BTU/h (29.31 kW/h)
78 %
3.9 g/h
CSA B415.1
9 to 10 hours
547 lb (248 kg)
3
3.4 cu.ft. (0.104 m )
22" east-west***
6" (150 mm) diameter (vertical)
C-Cast
No
2
)
7