Appendix 4: Installation Of Secondary Air Tubes And Baffle - Enerzone Solution 3.4 Installation And Operation Manual

Appendix 4: Installation of Secondary Air Tubes and Baffle

44
1- Remove the 4 bricks on the left hand
side of the combustion chamber.
2- Starting with the rear tube, lean and
insert the right end of the secondary air
tube into the rear right channel hole.
Then lift and insert the left end of the
tube into the rear left channel.
3- Align the notch in the left end of the tube
with the left air channel hole. Secure
the tube in the channel hole using a
cotter pin.
4- Repeat step 1 and 2 for the other
secondary air tubes.
5- To remove the tubes use the above
steps in reverse order.
Solution 3.4 Installation and Operation Manual