8.8.
Removal of DN-Board
1. Disconnect the connectors (DN3, DN5, DN9, PB31,
PB32, PB33, PB34, PB35, PB38).
2. Remove the flexible cables from the connectors (DN1,
DN2).
3. Remove 2 screws ( ) and then remove the PB-Board
Block.
4. Remove 2 screws ( ) and then remove DN-Board.
Note:
A re-setup of the destination is performed by MS
mode after DN-Board exchange.
8.9.
Removal of D-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Disconnect the connectors (D3, D5, D25).
3. Remove the flexible cables from the connectors (D20,
D31, D32, D33).
4. Remove 4 screws and then remove D-Board.
8.10. Removal of P-Board
1. Disconnect the connectors (P2, P6, P7 P9, P11, P12,
P25).
2. Remove 8 screws and then remove P-Board (MULTI), P-
Board (SUS) and Fixed Plate.
8.11. Removal of H3-Board (L), (R)
1. Remove 2 screws and then remove the Speaker Terminal
Blocks (L), (R).
2. Disconnect the connector (H37)
3. Remove 6 screws (G) and then remove H3-Board.
21
TH-58PF11EK