Installing A Memory Module - Fujitsu LIFEBOOK P702 User Manual

Installing a Memory Module

Align the connector edge of the memory upgrade module, chip side up, with the connector slot in the
1
compartment. (Figure 25)
Insert the memory upgrade module at a 45
2
Press the memory upgrade module down into the compartment until it locks underneath the retaining clip. You
3
will hear a click when it is properly in place.
Replace the memory compartment cover. (Figure 26)
4
Figure 25. Inserting a Memory Module
T
HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR
SHOULD LEAVE IT IN PLACE UNLESS YOU WANT TO INCREASE SYSTEM MEMORY CAPACITY
angle and press it firmly onto the connector.
o
63 - Memory Upgrade Module
Figure 26. Reinstalling the Memory Cover
LIFEBOOK . O
NOTEBOOK
.
,
NCE IT IS INSTALLED YOU