Hibernate Feature - Fujitsu LIFEBOOK P702 User Manual

• Allowing the battery to reach the Dead Battery Warning condition.
Your notebook's system memory typically stores the file on which you are working, open application information, and
any other data required to support operations in progress. When you resume operation from Sleep mode, your
notebook will return to the point where it left off. You must use the Power/Suspend/Resume button to resume
operation, and there must be an adequate power source available, or your notebook will not resume.
I
•
F RUNNING YOUR NOTEBOOK ON BATTERY POWER
THOUGH NOT AS FAST AS WHEN FULLY OPERATIONAL
D
•
ISABLING THE
T
HE BUTTON RESUME FUNCTION CAN
T S
•
HE LEEP OR
INFORMATION
SUSPENSION
I
•
F YOUR NOTEBOOK IS ACCESSING INFORMATION WHEN YOU ENTER
FILES ARE LEFT OPEN AND MEMORY IS KEPT ACTIVE DURING
H
IBERNATION MODE
T
•
HE MAIN ADVANTAGE OF USING
YOU WILL BE LEAVING YOUR NOTEBOOK IN A SUSPENDED STATE FOR A PROLONGED PERIOD OF TIME
IS THAT IT LENGTHENS THE POWER UP

Hibernate Feature

The Hibernation feature saves the contents of your notebook's system memory to the hard drive as a part of the
Suspend/Resume mode. You can enable or disable this feature.
Enable or Disable the Hibernation Feature
The Hibernate is enabled by default. To disable or enable the Hibernation feature follow these steps:
From the Start menu, select Control Panel, then select the Power Options icon.
1
Select "Choose what the power button does" or "Choose what closing the lid does", then make your selections (Do
2
Nothing, Sleep, Hibernate, or Shut Down).
P /S /R
OWER USPEND ESUME BUTTON PREVENTS IT FROM BEING USED TO PUT THE NOTEBOOK INTO
'
T BE DISABLED
H
IBERNATION MODE SHOULD NOT BE USED WITH CERTAIN
. W PC C
HEN ARDS OR EXTERNAL DEVICES ARE IN USE
,
BECAUSE ALL OF THE PERIPHERAL DEVICES WILL BE RE
.
H
IBERNATION IS THAT POWER IS NOT REQUIRED TO MAINTAIN YOUR DATA
/
DOWN SEQUENCES AND RESETS PERIPHERAL DEVICES
,
NOTE THAT THE BATTERY CONTINUES TO DISCHARGE WHILE YOUR NOTEBOOK IS IN
.
.
PC C
ARDS
, H
IBERNATION MODE CANNOT RETURN TO THE EXACT STATE PRIOR TO
-
INITIALIZED WHEN THE SYSTEM RESTARTS
S H
LEEP OR IBERNATION MODE
S
LEEP MODE OR THE MEMORY IS TRANSFERRED TO THE INTERNAL HARD DRIVE DURING
52 - Power Management
S
LEEP OR
. C PC C
HECK YOUR ARD DOCUMENTATION FOR MORE
.
,
CHANGES TO OPEN FILES ARE NOT LOST
. T
HIS IS PARTICULARLY IMPORTANT IF
. T
HE DRAWBACK OF USING
.
S ,
LEEP MODE
H .
IBERNATION MODE
. T
HE
H
IBERNATION MODE