Related Manuals for Boser BPF-3307
Summary of Contents for Boser BPF-3307
- Page 1 BPF-3307 7” Fanless Panel PC with Touch Screen, +12V~+24V DC In Provides Intel® Atom™ processor 1.6GHz, 2W AMP Stereo Speaker...
- Page 2 Unauthorized reproduction, transmission, translation, and storage of any form and means (i.e., electronic, mechanical, photocopying, recording) of this document, in whole or partly, is prohibited, unless granted permission by BOSER Technology Co., Ltd. reserves the right to change or improve the contents of BOSER Technology Co., Ltd.
-
Page 3: Table Of Contents
Table of Contents Chapter 1 General Description ........1 1.1 Major Features ............... 2 1.2 Specifications ................ 2 1.3 Dimensions ................4 Chapter 2 Unpacking ..........5 2.1 Opening the Delivery Package..........5 2.2 Inspection................5 Chapter 3 Hardware Installation ......7 3.1 HDD Installation..............7 3.2 WLAN Device Installation ............. - Page 4 Declaration of Conformity -- CE Mark BOSER Technology hereby acknowledges that compliance testing in accordance with applicable standards of the EU’s EMC Directive, 89/336/EEC, was successfully completed on a sample of the equipment identified below: Equipment Class: Information Technology Equipment...
-
Page 5: Safety Instructions
Safety Instructions The safety recommendations outlined in this section are to be read, understood and followed before you operate the product. Keep this information in a safe place for future reference. Failure to comply with any of the following safety procedures could result in serious damage. Do not operate product for any purposes other than its intended use This product is intended for indoor use only Do not operate product if power cord is damaged in anyway... - Page 6 Life Expectancy of Constituent Parts This section describes the life expectancy of constituent parts (backlight, power supply, internal cooling fan and touch screen) which make up to BPF-3307. TFT Display Backlight Display brightness decreases over time with use. The expected operating lifetime of the backlight time to reach 50% initial brightness is 30,000 hours (assuming continuous lit state at 25 degrees C).
-
Page 7: Chapter 1 General Description
Chapter 1 General Description The BPF-3307 is a latest Industrial Panel PC, Panel PC features an anti-vibration design and is a best cost-effective alternation for users. This precise streamline platform can be applied to Kiosks, DSA, transaction terminals, POS, home security systems, ATM systems and voting machines, etc. -
Page 8: Major Features
Built-in touch screen, HS-3658+Intel® Atom™ N270 processor 1.6GHz, +12V~+24V DC in Onboard graphics, GB ethernet, audio controller 1 x 2.5” SATA HDD space Provides 2W AMP with Stereo Speaker BPF-3307-S provides 2 x COM, 2 x USB2.0, mini PCI socket, mini PCIex1 socket Specifications System SBC Model HS-3658 Intel®... - Page 9 System Chipset: Intel® 945GSE/ICH7-M System Memory 1 x 200-pin SO-DIMM socket DDR 533MHz up to 2GB Display Chipset Intel® 945GSE integrated Intel® GMA950 Audio Chipset RealTek ALC202A 2W AMP with Stereo Speaker Ethernet Chipset RealTek RTL8111C 10/100/1000 Mbps LAN Drive Bay 1 x 2.5”...
-
Page 10: Dimensions
Pixel Pitch (mm) 0.0635 x 0.1905 Back-light Touch Screen 7” resistive I/O Interface External I/O PS/2 KB/MS, 2 x COM, LAN, 2 x USB2.0 Rear I/O Power ON/OFF COM 1 DC In KB/MS USB2.0 *2 COM 2 Dimensions Dimension measured in cm... -
Page 11: Chapter 2 Unpacking
Chapter 2 Unpacking Opening the Delivery Package The BPF-3307 is packed with an anti-static bag. The board contains sensitive electricity components that are easily damaged by static (electricity). Do not remove the anti-static wrapping until proper grounding have been taken. Safety instructions has been described the anti-static precautions and procedures in the previous. - Page 12 This page intentionally left blank.
-
Page 13: Chapter 3 Hardware Installation
Chapter 3 Hardware Installation This chapter illustrates how to install components into the Panel PC system. Please refer to the external interface of the board manual of the system. HDD Installation Follow the photo instructions to install the HDD mounting bracket onto the HDD. -
Page 14: Wlan Device Installation
Follow the photo instruction to install the HDD_KIT onto the chassis. WLAN Device Installation User can install the Network antenna module as below. -
Page 15: Back Cover Installation
Back Cover Installation Follow the photo instructions to install the back cover onto the chassis. -
Page 16: Wall Mount Kit
Wall Mount Kit Follow the photo instructions to install the wall mount kit onto the chassis. -
Page 17: Chapter 4 Touch Screen Driver Installation
Chapter 4 Touch Screen Driver Installation This chapter illustrates the detail information of touch screen driver installation procedures. The utility disk that came with the delivery package contains an auto-run program that invokes the installation programs for the touch screen driver. The following sections describe the installation procedures of driver based on WIN2000 operating systems. - Page 18 The next screen is “Software License Agreement”, select “I accept” and click on Next>. Click “Install” to begin the installation.
- Page 19 Once the Install Shield Wizard finishes updating your system, it will prompt you to restart the computer. Click on Finish to exit the wizard. 4.1.2 Installing Touch Screen Driver in WIN2000 Insert Utility CD Disk to your CD-ROM drive. The main menu will pop up as shown below.
- Page 20 The next screen is Software License Agreement, select I accept and click on Next>. The next screen is Ready to Install the Program, click on Install.
- Page 21 Once the Install Shield Wizard finishes updating your system, it will prompt you to restart the computer. Click on Finish to exit the wizard. 4.1.3 PenMount Control Panel Calibrate To adjust the display with touch screen, click on “Calibrate” button and follow the calibrate point to do the calibration, there are five points on screen for calibration.
- Page 22 Draw Test or demonstrate PenMount touch screen operation, also the touch location is shown on the display, touch DRAW to start. About It shows information about PenMount controller and driver version.
-
Page 23: Control Panel
4.1.4 PenMount Monitor The PenMount monitor icon is shown in the menu bar of Windows system when you turn on PenMount monitor from PenMount Utilities. There are several functions on PenMount monitor: Control Panel When select this function, there is a mouse icon shown in the right-button place of screen. - Page 24 This page intentionally left blank.
Need help?
Do you have a question about the BPF-3307 and is the answer not in the manual?
Questions and answers