Related Manuals for Boser BPF-3315
Summary of Contents for Boser BPF-3315
- Page 1 BPF-3315 15” Fanless Panel PC with Touch Screen, MainBoard, 12V DC Adapter Provides Intel® Atom™ processor 1.6GHz...
- Page 2 Unauthorized reproduction, transmission, translation, and storage of any form and means (i.e., electronic, mechanical, photocopying, recording) of this document, in whole or partly, is prohibited, unless granted permission by BOSER Technology Co., Ltd. reserves the right to change or improve the contents of BOSER Technology Co., Ltd.
-
Page 3: Table Of Contents
Table of Contents Chapter 1 General Description ........1 1.1 Major Features ............... 2 1.2 Specifications ................ 2 1.3 Dimensions ................4 Chapter 2 Unpacking ..........5 2.1 Opening the Delivery Package..........5 2.2 Inspection................5 Chapter 3 Hardware Installation ......7 3.1 Installation SBC ..............7 3.2 HDD Installation.............. - Page 4 Declaration of Conformity -- CE Mark BOSER Technology hereby acknowledges that compliance testing in accordance with applicable standards of the EU’s EMC Directive, 89/336/EEC, was successfully completed on a sample of the equipment identified below: Equipment Class: Information Technology Equipment...
-
Page 5: Safety Instructions
Safety Instructions The safety recommendations outlined in this section are to be read, understood and followed before operating the product. Keep this information in a safe place for future reference. Failure to comply with any of the following safety procedures could result in serious damage. Do not operate product for any purposes other than its intended use This product is intended for indoor use only Do not operate product if power cord is damaged in anyway... - Page 6 Life Expectancy of Constituent Parts This section describes the life expectancy of constituent parts (backlight, power supply, internal cooling fan and touch screen) which make up to BPF-3315. TFT Display Backlight Display brightness decreases over time with use. The expected operating lifetime of the backlight time to reach 50% initial brightness) is 30,000 hours (assuming continuous lit state at 25 degrees C).
-
Page 7: Chapter 1 General Description
Chapter 1 General Description The BPF-3315 is a latest Industrial Panel PC, Panel PC features anti-vibration design and is a best cost-effective alternation for users. This precise streamline platform can be applied to Kiosk, DSA, transaction terminal, POS, home security system, ATM system and voting machine parking field and more. -
Page 8: Major Features
I/O feature contains VGA, COM, GB LAN, USB 2.0, Audio, and PS/2 connectors. Major Features The BPF-3315 series comes with the following features: Fanless, aluminum front panel design 15” TFT color panel display Built-in touch screen, Brightness Control, SBC+Intel®... - Page 9 System Chipset: Intel® 945GSE/ICH7-M System Memory 1 x 200-pin SO-DIMM socket up to 2GB DDR2 SDRAM Display Chipset Intel® 945GSE integrated Intel® GMA950 Audio Chipset RealTek ALC202A 2W AMP with Stereo Speaker Ethernet Chipset RealTek RTL8111C 10/100/1000 Mbps LAN Provides Wireless LAN Module (option) Drive Bay 1 x 2.5”...
-
Page 10: Dimensions
LCD Color 16.2M/262K colors Pixel Pitch (mm) 0.297 x 0.297 Touch Screen 15” resistive I/O Interface External I/O 6 x COM, MIC In, Line Out, PS/2 KB/MS, 6 x USB2.0, VGA, LAN Rear I/O COM 6 MIC In COM 5 Line Out COM 4 COM 2... -
Page 11: Chapter 2 Unpacking
Chapter 2 Unpacking Opening the Delivery Package The BPF-3315 is packed with an anti-static bag. The board contains sensitive electricity components that are easily damaged by static (electricity). Do not remove the anti-static wrapping until proper grounding have been taken. Safety instructions has been described the anti-static precautions and procedures in the previous. - Page 12 This page intentionally left blank.
-
Page 13: Chapter 3 Hardware Installation
Chapter 3 Hardware Installation This chapter illustrates how to install components into the Panel PC system. Please refer to the external interface of the board manual of the system. Installation SBC Install the SBC with chassis. Screw the SBC with the front panel. -
Page 14: Hdd Installation
HDD Installation Follow the photo instruction to install the HDD mounting bracket onto the HDD. Follow the photo instruction to install the HDD_KIT onto the chassis. -
Page 15: Wlan Device Installation
WLAN Device Installation User can install the Network antenna module as below. Back Cover Installation Follow the photo instruction to install the back cover onto the chassis. -
Page 16: Wall Mount Kit
Wall Mount Kit Follow the arrow to locate the Panel PC in the wall. - Page 17 Hook the Panel PC with four wall mount fixers (A). And screw the wall mount fixers with the wall by M4X10 Round Head Screw (B).
- Page 18 This page intentionally left blank.
-
Page 19: Chapter 4 Touch Screen Driver Installation
Chapter 4 Touch Screen Driver Installation This chapter illustrates the detail information of touch screen driver installation procedures. The utility disk that came with the delivery package contains an auto-run program that invokes the installation programs for the touch screen driver. The following sections describe the installation procedures of driver based on WINXP operating systems. - Page 20 The screen displays “PenMount Universal Driver Setup Wizard”, click on Next> to install continue. The next screen is “License Agreement”, select “I Agree” to keep driver install.
- Page 21 Select the directory where the driver installed and click “Install” to go on. Once the Install Shield Wizard finishes updating your system, it will prompt you to restart the computer. Click on Finish to exit the wizard.
- Page 22 4.1.1 PenMount Control Panel Calibrate To adjust the display with touch screen, click on “Calibrate” button and follow the calibrate point to do the calibration, there are five points on screen for calibration.
-
Page 23: Control Panel
Draw Test or demonstrate PenMount touch screen operation, also the touch location is shown on the display, touch DRAW to start. About It shows information about PenMount controller and driver version. 4.1.2 PenMount Monitor The PenMount monitor icon is shown in the menu bar of Windows system when turn on PenMount monitor from PenMount Utilities. - Page 24 Right Button Change Right/Left button by clicking the mouse icon box. Blue area expresses what button has been or actived. Beep Turn on or off beep sound. Exit Close the PenMount Monitor function.
Need help?
Do you have a question about the BPF-3315 and is the answer not in the manual?
Questions and answers