Maintenance And Cleaning; Troubleshooting - Black & Decker BDH1850SM Instruction Manual

Hide thumbs Also See for BDH1850SM:
Table of Contents

Advertisement

Available languages

Available languages

AfTeR USe - fig. P
• Return the handle tube (4) to the upright position
and turn the steam mop 'OFF'.
• Place the steam mop on the resting mat (7)
and wait until the steam mop cools down.
(approximately five minutes)
• Unplug the steam mop from the wall outlet.
• Empty the water tank (3).
• Remove the hand held unit and empty the water tank.
• Remove the cleaning pad (6) and wash it so that it is
ready for the next use. (Take care to follow the wash
care instructions printed on the cleaning pad).
• Wrap the electric cord around the cord hooks (26 & 27).
NOTICe:
The top cord hook rotates to easily release the cord ready for next use.
• Place steam mop on the resting mat for storage.
NOTICe:
With the handle tube in the upright position, the cord neatly wrapped
around the cord hooks your steam mop will stand on its own for storage. Alternatively
there is a hanging bracket built into the hand grip which will allow your steam mop to be
hung from a suitable hook on the wall. Always ensure that your wall hook is capable of
supporting the weight of the steam mop safely.
Your Black & Decker corded appliance has been designed to operate over a long period
of time with a minimum of maintenance. Continuous satisfactory operation depends
upon proper appliance care and regular cleaning.
WARNINg:
switch off and unplug the appliance.
• Clean your appliance using a soft damp cloth. Never let any liquid get inside the
appliance; never immerse any part of the appliance into a liquid. IMPORTANT: To
assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment
should be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
• For stubborn marks you can use a mild solution of soap and water to dampen your cloth.
CARe Of The CLeANINg PADS
NOTICe:
Follow the cleaning instructions printed on the label of your cleaning pad.
Wash care instructions - Machine wash warm 140°F (60°C) - No bleach - No fabric
softener - Air dry only - Allow to dry fully before re-use.
Recommended accessories for use with your appliance are available from your local
dealer or authorized service center. If you need assistance regarding accessories, please
call: 1-800-544-6986.
WARNINg:
appliance could be hazardous.
PROBLeM
• Unit will not start.

MAINTeNANCe AND CLeANINg

Before performing any maintenance or cleaning on corded appliances
ACCeSSORIeS
The use of any accessory not recommended for use with this

TROUBLeShOOTINg

POSSIBLe CAUSe
• Cord not plugged in.
• Main switch not on.
• Floor head not correctly
fitted.
• Handle not fitted
correctly - LED's do not
light up.
• Circuit fuse is blown.
P
POSSIBLe SOLUTION
• Plug appliance into a working
outlet.
• Turn main switch on.
• Ensure floor head is correctly
attached.
• Fit Handle correctly
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
10
26
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents