Setting Local User Password Control Parameters - HP 5920 Series Configuration Manual

Step
2. Create a user group and enter
user group view.
3. Configure the password
expiration time for the user
group.
4. Configure the minimum
password length for the user
group.
5. Configure the password
composition policy for the
user group.

Setting local user password control parameters

Step
1. Enter system view.
2. Create a device management
user and enter local user view.
3. Configure the password
expiration time for the local
user.
4. Configure the minimum
password length for the local
user.
Configure the password
5.
composition policy for the
local user.
Command
user-group group-name
password-control aging aging-time
password-control length length
password-control composition
type-number type-number
[ type-length type-length ]
Command
system-view
local-user user-name class manage
password-control aging aging-time
password-control length length
password-control composition
type-number type-number
[ type-length type-length ]
105
Remarks
By default, no user group exists.
For information about how to
configure a user group, see
"Configuring AAA."
By default, the password
expiration time of the user group is
the same as the global password
expiration time.
By default, the minimum password
length of the user group is the same
as the global minimum password
length.
By default, the password
composition policy of the user
group is the same as the global
password composition policy.
Remarks
N/A
By default, no local user exists.
Local user password control
applies to device management
users instead of network access
users.
For information about how to
configure a local user, see
"Configuring AAA."
By default, the setting equals that
of the user group to which the local
user belongs. If no expiration time
is configured for the user group,
the local user will take the global
setting.
By default, the setting equals that
of the user group to which the local
user belongs. If no minimum
password length is configured for
the user group, the local user will
take the global setting.
By default, the settings equal that
of the user group to which the local
user belongs. If no password
composition policy is configured
for the user group, the local user
will take the global settings.