Table of Contents
Advertisement
QQ
3 7 63 1515 0
Checking the audio signal
format
You can check the audio signal format by
pressing
(audio) repeatedly during
playback. The format of the current audio
signal (Dolby Digital, DTS, PCM, etc.)
appears as shown below.
◆When playing a DVD VIDEO
Example:
Dolby Digital 5.1 ch
Rear (L/R)
1 : ENGLISH DOLBY DIGITAL
Front (L/R)
LFE (Low Frequency
+ Centre
Effect)
Example:
Dolby Digital 3 ch
2 : SPANISH DOLBY DIGITAL
Front (L/R)
◆When playing a DivX video file on a DATA
CD or a DATA DVD
Example:
MP3 audio
1:
MP3 128k
Bit rate
TE
L 13942296513
◆TVS NIGHT
Large sounds, such as explosions, are
suppressed, but quieter sounds are
unaffected. This feature is useful when you
want to hear the dialogue and enjoy the
surround sound effects of "TVS WIDE" at
low volume.
◆TVS STANDARD
Creates three sets of virtual rear speakers
from the sound of the front speakers (L, R)
without using actual rear speakers (shown
below). Use this setting when you want to use
TVS with 2 separate speakers.
L
L: Front speaker (left)
R: Front speaker (right)
: Virtual speaker
Notes
• When the playing signal does not contain a signal
for the rear speakers, you cannot hear the
surround effects.
• When you select one of the TVS modes, turn off
the surround setting of the connected TV or
amplifier (receiver).
• Make sure that your listening position is between
and at an equal distance from your speakers, and
that the speakers are located in similar
surroundings.
• Not all discs will respond to the "TVS NIGHT"
function in the same way.
• The TVS effects do not work when using the Fast
Play or Slow Play functions, even though you can
change the TVS modes.
www
.
http://www.xiaoyu163.com
About audio signals
Audio signals recorded in a disc contain the
sound elements (channels) shown below.
Each channel is output from a separate
speaker.
• Front (L)
• Front (R)
• Centre
• Rear (L)
• Rear (R)
• Rear (Monaural): This signal can be either
the Dolby Surround Sound processed
signals or the Dolby Digital sound's
monaural rear audio signals.
• LFE (Low Frequency Effect) signal
Notes
3 / 2 .1
• If "DTS" in "AUDIO SETUP" is set to "OFF,"
the DTS track selection option will not appear on
the screen even if the disc contains DTS tracks
(page 70).
• MPEG audio signals with more than two channels
will appear as shown above (3/2.1, 2/1), but only
the Front (L) and Front (R) signals will be output
from your two front speakers.
2 / 1
Rear
(Monaural)
R
x
ao
y
i
http://www.xiaoyu163.com
8
TV Virtual Surround
Settings
When you connect a stereo TV or 2 front
speakers, TVS (TV Virtual Surround) lets
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left,
R: right) without using actual rear speakers.
TVS was developed by Sony to produce
surround sound for home use using just a
stereo TV.
If the player is set up to output the signal from
the DIGITAL OUT (OPTICAL* or
COAXIAL) jack, the surround effect will
only be heard when "DOLBY DIGITAL" is
set to "D-PCM" and "MPEG" is set to
"PCM" in "AUDIO SETUP" (page 69).
* DVP-NS52P only
1
Press SUR during playback.
The following display appears.
2
Press SUR repeatedly to select
one of the TVS sounds.
See the explanations given for each item
in the following section.
• TVS DYNAMIC THEATER
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
Q Q
• TVS STANDARD
3
6 7
1 3
43
44
Enjoying Movies
Changing the Angles
If various angles (multi-angles) for a scene
are recorded on the DVD VIDEO, "
appears in the front panel display. This means
that you can change the viewing angle.
1
Press
The number of the angle appears on the
display.
2
Press
select an angle number.
The scene changes to the selected angle.
Note
Depending on the DVD VIDEO, you may not be
able to change the angles even if multi-angles are
recorded on the DVD VIDEO.
u163
.
45
46
1-11
DVP-NS30/NS32/NS33/NS52P
2 9
9 4
2 8
To cancel the setting
Select "OFF" in step 2.
(TVS)
◆TVS DYNAMIC THEATER
Creates one set of LARGE virtual rear
speakers and virtual subwoofer from the
sound of the front speakers (L, R) without
using actual rear speakers and subwoofer
(shown below).
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
◆TVS DYNAMIC
Creates one set of virtual rear speakers from
the sound of the front speakers (L, R) without
using actual rear speakers (shown below).
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
SUR
◆TVS WIDE
Creates five sets of virtual rear speakers from
the sound of the front speakers (L, R) without
using actual rear speakers (shown below).
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
TVS DYNAMIC THEATER
1 5
0 5
8
2 9
9 4
Displaying the Subtitles
If subtitles are recorded on the discs, you can
change the subtitles or turn them on and off
whenever you want while playing the disc.
"
1
Press
playback.
(angle) during playback.
The following display appears.
1:ENGLISH
2
2
Press
select a setting.
(angle) repeatedly to
◆ When playing a DVD VIDEO
Select the language.
Depending on the DVD VIDEO, the
choice of language varies.
When 4 digits are displayed, they
indicate a language code. See "Language
m
Code List" on page 77 to see which
language the code represents.
◆ When playing a DVD-RW
co
Select "ON."
9 9
TV
Sub
woofer
TV
TV
2 8
9 9
(subtitle) during
(subtitle) repeatedly to
Hide quick links:
Advertisement
Table of Contents
