Sony DVP-NS30 Servise Manual page 70

QQ
3 7 63 1515 0
5. Checking Component Video Output Y
<Purpose>
This checks component video output Y. If it is incorrect, correct
brightness will not be attained when connected to, for instance,
projector.
Mode
Signal
Test point
Instrument
Specification
Checking method:
1) In the Video Signal menu "1" Color Bar 100% play back.
2) Confirm that the Y level is 1.0 ± 0.08 Vp-p.
6. Checking Component Video Output B-Y
<Purpose>
This checks component video output B-Y. If it is incorrect, correct
TE
L 13942296513
colors will not be displayed when connected to, for instance, projector.
Mode
Signal
Test point
Instrument
Specification
Checking method:
1) In the Video Signal menu "1" Color Bar 100% play back.
2) Confirm that the B-Y level is A.
www
.
http://www.xiaoyu163.com
HLX-504
Color bars
COMPONENT VIDEO OUT (Y)
connector, (75 Ω terminated)
Oscilloscope
1.0 ± 0.08 Vp-p
1.0 ±0.08 Vp-p
Fig. 7-5.
HLX-504
Color bars
COMPONENT VIDEO OUT (P
connector (75 Ω terminated)
Oscilloscope
A = 700 ± 70 mVp-p
A
Fig. 7-6.
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
7. Checking Component Video Output R-Y
<Purpose>
This checks component video output R-Y. If it is incorrect, correct
colors will not be displayed when connected to, for instance, projector.
Mode
Signal
Test point
Instrument
Specification
Checking method:
1) In the Video Signal menu "1" Color Bar 100% play back.
2) Confirm that the R-Y level is B.
Q Q
3 6 7 1 3 1 5
)
B
co
.
7-3
DVP-NS30/NS32/NS33/NS52P
9 4 2 8
HLX-504
Color bars
COMPONENT VIDEO OUT (P
connector (75 Ω terminated)
Oscilloscope
B = 700 ± 70 mVp-p
B
Fig. 7-7.
0 5 8 2 9 9 4 2 8
m
9 9
)
R
9 9