Grounding - ATEN VS482 User Manual

VS482 User Manual
2. Screw the bracket into any convenient location on the rack.
Note: These screws are not provided. We recommend that you use M5 x 12
Phillips Type I cross, recessed type screws.

Grounding

To prevent damage to your installation it is important that all devices are
properly grounded.
1. Use a grounding wire to ground the VS482 by connecting one end of the
wire to the grounding terminal, and the other end of the wire to a suitable
grounded object.
2. Make sure that the computer(s)/device(s) that the VS482 connects to are
properly grounded.
8