Preparing For Use / Unfolding And Folding / Dismantling; Preparation For Use - Quinny Buzz Instructions For Use Manual

1
1
2
2
1 2
2
1
4 5
4 PREPARING FOR USE / UNFOLDING AND
FOLDING / DISMANTLING
Please note: the left and right sides are as seen from the handlebar/back.

4.1 Preparation for use

Fitting the wheels
1. Press the release button and insert the axle of the rear wheels into the Quinny Buzz
frame until you hear it 'click' (Fig. 1).
2. Push the front fork into the frame until it 'clicks' (Fig. 2).
Unfolding the frame
The Quinny Buzz has a unique mechanism, which results in the automatic unfolding
of the frame. The temperature of the environment may somewhat affect the workings
of this mechanism; in case of cool or freezing temperatures the Quinny Buzz may
unfold slower than usual (room temperature).
- Warning: do not touch any moving parts with your hands as the frame unfolds.
3. Push the transport hook near the right rear bar to the side and pull the handlebar
up (Fig. 3).
4. The frame automatically unfolds. The handlebar clicks into the locking device
(Fig. 4).
Adjusting the handlebar height
- Push the adjustment button in and slide the handlebar to the desired height.
The handlebar will lock with a 'click' (Fig. 5).
6
P
3 6 7
9 10
Parking brake
- Note: always use the parking brake, even when standing still for only a few
moments!
1. Push down on the red pedal (P) to set the parking brake on the Quinny Buzz (Fig. 6).
2. Push down on the other pedal to release the brake of the Quinny Buzz.
Adapters
The adapters and the corresponding connection points are marked with an L (left)
and an R (right).
1. Make sure that connection points are facing directly upwards, if necessary adjust
using silver button in connection point (Fig. 7).
2. Slide adapter into connection point (Fig. 8).
3. Check to make sure everything is secure.
4. Place the carrycot (Fig. 9). For further use see the instructions for the carrycot.
5. Place the Maxi-Cosi baby car seat (Fig. 10). For further use see the Maxi-Cosi baby
car seat instruction manual.
6. Remove the adapter by pressing in the button (on the inside) and pull the adapter
from the Quinny Buzz frame (Fig. 11).
Quinny Buzz seat unit:
The Quinny Buzz seat unit is suitable for children from birth to age 4 (maximum of
20 kg). If your child is not yet able to sit up unassisted, use the reclining position only.
- Note: the pushchair seat unit can only be fitted when the adapters have been
removed.
Placing the Quinny Buzz seat:
1. Lower the Quinny Buzz seat onto the Quinny Buzz frame until it 'clicks' (Fig. 12).
1
2
8 12
1 1
2
2
2
1
11
15
Placing the Quinny Buzz seat & adjusting the seat:
Rearward facing
1. The Quinny Buzz seat can now be adjusted to two positions: a sitting position and
a reclining position. Push the adjustment/release buttons on both sides downwards
and tilt the Quinny Buzz seat into the desired position (Fig. 13).
2. The Quinny Buzz seat can also be placed in a forward-facing position (Fig. 14).
3. The Quinny Buzz insert can now be adjusted to three positions: a sitting position,
a semi-reclining position and a reclining position. Push the adjustment/release
buttons on both sides downwards and tilt the Quinny Buzz insert into the desired
position (Fig. 15).
IMPORTANT: When positioning and adjusting the Quinny Buzz seat check that the
adjustment/release buttons are locked on both sides.
Removing the Quinny Buzz seat:
1. Push the adjustment/release buttons on both sides downwards and lift the Quinny
Buzz seat from the Quinny Buzz frame position (Fig. 16).
Locking the swivel wheel
It is advisable to lock the swivel wheel into a fixed position when driving the push-
chair straight ahead for a longer period.
1. Turn the front wheels to the rearmost position and push the swivel locks down.
The front wheels are now locked into their fixed position.
2. To unlock the swivel wheels, push the swivel wheel locks upwards. (Fig. 17).
13 14 18
17
16 21
Sun canopy
1. Clip the sun canopy onto the frame of the Quinny Buzz seat. Check that the sun
canopy is properly secured. The sun canopy is height adjustable (Fig. 18).
2. To remove the sun canopy push the clips off the frame.
3. There is a special sun shade for extra protection. Unfold the sun shade from under
the sun canopy towards the outside (Fig. 19).
Raincover
1. Place the transparent raincover over the sun canopy and hook it over the underside
of the footrest (Fig. 20).
2. The sun canopy is height-adjustable (Fig. 21). With the sun canopy at its lowest
setting: close the snaps on the foot section (Fig. 22).
3. The (double) zipper in the rain cover can be opened for extra ventilation (Fig. 23).
1
2
19 20
22 23
7