Digital Signal Input Source Router; Microsoft Serial Mouse Version 2; Spare Parts - Sony DME-3000 Product Manual

DVS-V1201
DME-3000/7000 • Product Guide

Digital Signal Input Source Router

The DVS-V1201 Digital Signal Input Source Router accepts 12 video inputs and
provides one video output. Up to two units can be used for input source selection of
primary video and key signals. Input source control is the ability to change images
on a keyframe-by-keyframe basis or on an edge switch. Source selection may be
performed from the control panel included with the DVS-V1201, or you can use the
DME's GUI menu. An RS-422 connection is required between the DVS-V1201
and the DME chassis.
Note that RS-422 interconnect cables are not provided. See the "System Cables"
heading above for part numbers and information. RS-422 interconnect cables have
a maximum length of 100 meters.

Microsoft Serial Mouse Version 2

(User-supplied)
A Microsoft serial mouse version 2 or Microsoft compatible serial mouse is highly
recommended.

Spare Parts

When ordering replaceable parts such as printed circuit boards and major
components, use the following names and part numbers:
•
CPU-114 Board, p/n A-8275-400-A (DME-3000)
•
CPU-196 Board, p/n A-8272-261-A (DME-7000)
•
DPR-35 Board, p/n A-8275-401-A (DME-3000)
•
DPR-70 Board, p/n A-8272-263-A (DME-7000)
•
MPU-70 Board, p/n A-8275-402-A
•
Power Assembly, p/n A-8267-803-A
•
EX-394 Extender Board, p/n J-6188-100-A
SONY
Configuration Guide • • 29