DME-Series Components
Basics
DME-3000
DME-7000
DME-3000/7000 • Product Guide
The following sections describe the standard and optional components that
comprise the DME-3000 and DME-7000 systems. Five sections are included:
•
Basics
•
Software and Manuals
•
Control Panels and Monitors
•
Input Boards
•
Effects Boards
•
Peripherals
All items are common to both products except where noted.
This section describes the basic hardware and software components that comprise a
DME-3000 or DME-7000 system.
Processor (DME-3000)
(DME-3000 only)
The DME-3000 Processor houses the main electronics, communication ports, all
input/output connectors, CPU Board, Video Processing Board, 3D Linear Address
Board, and Mother Board. Please note:
•
The Operation Software BZDM-3020 or BZDM-3720 is required.
•
The DME-3000 system supports up to 2 channels. For a second
channel, order a second DME-3000 processor.
In the "Installation Guide" chapter, refer to the "DME-3000/7000 Chassis"
section for a chassis diagram and list of chassis specifications.
Note that RS-422 interconnect cables are not provided. In the "Peripherals"
section, see the "System Cables" heading for part numbers and information. RS-
422 interconnect cables have a maximum length of 100 meters.
Processor (DME-7000)
(DME-7000 only)
The DME-7000 Processor houses the main electronics, communication ports, all
input/output connectors, CPU Board, High Quality Video Processing Board, 3D
Linear Address Board, and Mother Board. Please note:
•
The Operation Software BZDM-7020 or BZDM-7720 is required.
•
The DME-7000 system supports up to 4 channels, two of which may
be DME-3000 processors. For a second, third, or fourth channel,
order the desired number of DME-3000 or DME-7000 processors.
In the "Installation Guide" chapter, refer to the "DME-3000/7000 Chassis"
section for a chassis diagram and list of chassis specifications.
Note that RS-422 interconnect cables are not provided. In the "Peripherals"
section, see the "System Cables" heading for part numbers and information. RS-
422 interconnect cables have a maximum length of 100 meters.
SONY
Configuration Guide • • 21