Default Settings - Buffalo AirStation WHR-HP-G54 Quick Setup Manual

The WHR-HP-G54 will automatically detect whether your internet is from a DSL or
Cable provider and ask you for any necessary information.
DSL
◗
If you have a DSL connection, you will probably have to enter your PPPoE login
information. Get this information from your ISP if you don't know it.
Cable
◗
Most Cable providers require no aditional settings to obtain an IP address. If your
connection requires a DNS server to be set up manually, a wizard will ask you for
the necessary information. Get it from your cable provider if you don't know it.

Default Settings

If at any time you wish to restore your AirStation's settings to factory defaults,
press the INIT button on the bottom of the AirStation for 15 seconds. Do not let go
of the INIT button until the red DIAG lights up or fl ashes. The restore process can
take up to two minutes.
This completes the basic AirStation Confi guration. To change advanced settings,
please consult the Online Manual on the CD-ROM or go to the Buffalo Support
Web Site: http://www.buffalo-technology.com
The AirStation can be re-confi gured anytime via a Web browser using a wired or
wireless connection by entering 192.168.11.1 or 192.168.11.100 if in bridge mode,
in the URL address fi eld of the Web browser and pressing the Enter key on the
keyboard. Of course, if you've changed your AirStation's LAN IP address, enter
the new LAN IP address instead.
7