Buffalo AirStation WHR-HP-G54 User Manual
  1. Manuals
  2. Brands
  3. Buffalo Manuals
  4. Network Router
  5. AirStation Turbo G WHR-HP-G54
  6. User manual

Buffalo AirStation WHR-HP-G54 User Manual

High-power wireless smartrouter
Hide thumbs Also See for AirStation WHR-HP-G54:
Table of Contents

Advertisement

Quick Links

User Manual - AirStation WHR-HP-G54
High-Power Wireless SmartRouter
www.buffalotech.com
v2.7

Advertisement

Table of Contents
loading

Related Manuals for Buffalo AirStation WHR-HP-G54

Summary of Contents for Buffalo AirStation WHR-HP-G54

  • Page 1 User Manual - AirStation WHR-HP-G54 High-Power Wireless SmartRouter www.buffalotech.com v2.7...

  • Page 2: Table Of Contents

    Table of Contents Introduction ............5 Installation .
  • Page 3 Table of Contents LAN Configuration ..... . . 26 LAN Port ......26 DHCP Server .
  • Page 4 Table of Contents Firmware Update....49 Diagnostic........50 System Information.

  • Page 5: Introduction

    Introduction ork and play - further and faster! Eliminate dead spots and enjoy faster connections with extended range with your new AirStation High Power Wireless SmartRouter System Requirements • A high-speed (Broadband) Internet connection or existing local area connection. • A computer with an Ethernet port and a web browser such as Firefox, Internet Explorer, Opera, or Safari.

  • Page 6: Installation

    Basic Setup egin by finding a good place to set up your router/access point. Some things to consider: • You’ll need to be able to plug your internet connection into it, so it should go within reach of the LAN cable from your DSL or Cable modem. You’ll also want a power outlet nearby.

  • Page 7: Automatic Installation

    Automatic Installation The AirNavigator CD can install your AirStation for you automatically. To use the automatic installation program, insert your AirNavigator CD into your computer and follow the onscreen directions. The wizard will guide you through installing your AirStation. You will have the opportunity to change your admin password, personalize your SSID, and set up WEP128 encryption.

  • Page 8: Layout

    Layout Power to outlet or surge protector Cable or DSL Modem...

  • Page 9: Manual Installation

    Manual Installation To install the AirStation manually, 1. Power down the Cable or DSL modem and the computer which will be used to configure the AirStation router. 2. Plug the Cable or DSL modem’s Ethernet cable into the AirStation’s WAN port. Initially, you may need to unplug this cable from your computer, hub or other router.

  • Page 10: Connecting Wireless Client Devices

    Connecting Wireless Clients to the Access Point To connect wireless devices to the AirStation, you may either enter the SSID and encryption key manually, or you can use AOSS to automatically configure your wireless settings. If you used Automatic Installation with default settings, then your AirStation’s SSID is “Buffalo”, and the encryption is 128-bit WEP with the 13 digit key...

  • Page 11: Aoss

    AOSS AOSS AOSS (AirStation One-Touch Secure System) is a simple system for configuring your wireless network securely. If your router and your client device are installed and both support AOSS, then making a secure wireless connection between them is very easy. Push the AOSS button on the top of your router and hold it in for a few seconds.
  • Page 12 AOSS Notes Some things to keep in mind when automatically connecting with AOSS: • Only one wireless client adapter can be configured with AOSS at a time. • It is not necessary to reconnect client devices that have already been configured via AOSS unless significant changes have been made to the wireless network.

  • Page 13: Router Access Point Mode

    Router/Access Point Mode This AirStation supports quickly changing the product from a wireless router to a conventional access point. Put your Airstation into Access Point Mode by moving the switch on the bottom of your AirStation from AUTO to BRI. This changes the default IP address of the AirStation from 192.168.11.1 to 192.168.11.100, and DHCP, NAT, and the WAN port are disabled.

  • Page 14: Airstation Configuration Tool

    Log in to the Web Admin Tool he Web Admin Tool allows you to easily change the settings for your AirStation. To use it, launch a web browser on a computer connected to the AirStation. Enter the AirStation’s LAN-side IP address into the URL field.

  • Page 15: Home

    AirStation Configuration Tool (Home) hen you first open your AirStation Configuration Tool, it takes you to its Home page. From Home, you can configure port mapping for your internet games, set UPnP for Windows (MSN) Messenger, configure your firewall, setup encryption, choose your wireless channel, update your AirStation’s firmware, and reset your Internet Connection’s configuration.

  • Page 16: Port Mapping

    Internet Games (Port Mapping) Select any ports that need to be opened for your internet games to function correctly. Consult your game’s documentation for more information on what ports need to be configured.

  • Page 17: Firewall

    Firewall/Intrusion Detector From this page, choose the level of firewall security you desire. You may also choose to have alerts sent to a different PC, if you like. Click Next when done to restart the router. Get to this page from Home by clicking on Firewall/Intrusion Detector.

  • Page 18: Upnp

    Windows (MSN) Messenger/UPnP Windows (MSN) Messenger requires UPnP for proper operation. You may Enable UPnP here. UPnP may need to be configured on your PC as well. If you need to configure UPnP on your PC, the links at the bottom of the page have instructions for doing so on Windows ME and XP computers.

  • Page 19: Encryption

    Wireless Encryption This page is available from Home by selecting Wireless Encryption. Here, you can manually select the type of wireless encryption you’d like to use. Your AirStation supports three different encryption schemes; choose the best one that all your clients support. Virtually all wireless clients support WEP.

  • Page 20: Wireless Channel

    Wireless Channel This page is available from Home by selecting Wireless channel. With Auto Channel selected, your AirStation will choose the best channel available. Current channel will show the channel that your AirStation is currently using. You may also select any channel from 1-11 manually.

  • Page 21: Firmware Update

    Firmware Update This page is available from Home by selecting Firmware update. Use Browse to select your firmware update file, and then click on Apply. Firmware update may take several minutes to complete. Don’t power down your AirStation until the diag LED has gone out.

  • Page 22: Internet Connection Wizard

    Internet Connection (Multisession Reset) From Home, selecting the Internet Connection Wizard (Multisession Reset) tab will begin the Internet Connection Wizard. The Internet Connection Wizard will only function correctly in simple networks, where your cable or DSL modem is plugged directly into your AirStation’s WAN port.

  • Page 23: Advanced Settings

    Advanced Settings Advanced Settings lets you configure every element of your AirStation. Get to Advanced Settings from Home by clicking the Advanced Tab. You may return to Home by clicking on the yellow > Home link in the top left corner.

  • Page 24: Wan Configuration

    WAN Config (WAN Port) Here, you may choose how the AirStation acquires an IP address. Normally, the internet connection wizard will set this for you if you have a cablemodem or DSL. If you’re not sure what to choose, perform Easy Setup.

  • Page 25: Pppoe

    PPPoE Many DSL connections require a PPPoE Connection in order to log in to an internet connection. Normally, the Easy Detection Wizard will help you configure that, but you may manually configure one here. Consult your ISP for more information on correctly configuring your PPPoE connection.

  • Page 26: Lan Configuration

    LAN Config (LAN Port) Default for the LAN side IP address is 192.168.11.1. To add the AirStation to an existing LAN, specify a unique IPaddress, not used elsewhere in the network. The default Subnet Mask is 255.255.255.0. To connect AirStation to an existing LAN, specify the Subnet Mask that the LAN uses.

  • Page 27: Dhcp Server

    Advanced DHCP Settings This page offers the same DHCP settings as the previous one, and in addition, offers you the chance to change the Lease Period, De- fault Gateway, DNS servers, WINS server, and Domain Name. Click Apply when you have the settings the way you want them.

  • Page 28: Manual Assignment Of Ip Address

    DHCP Server (Manual Assignment of IP Address) To manually link a LAN address to a MAC address, enter them under Add Client Infor- mation and click Add. Current DHCP Client Information shows all LAN addresses currently assigned by AirStation’s DHCP. You may configure a specific client to always receive the same IP address by clicking Manual Assignment to the right of its MAC Address.

  • Page 29: Route Information

    Network Config (Route Info) By default, the AirStation receives RIP (Route Information Protocol) information only from your local network, and doesn’t broadcast RIP at all. For large, complicat- ed network configurations, you may wish to modify this behavior. Click Apply when you have your desired configuration.

  • Page 30: Network Configuration

    Network Configuration (Edit Routing Information) To configure a route manually, enter its Destination Address and Gateway. Enter a maximum number of hops allowable in Metric and click Add.

  • Page 31: Address Translation

    You may disable Network Address Translation and IPsec passthrough by unchecking the appropriate Enable boxes. If you have a DMZ, enter its IP address in the IP Address of DMZ box. Incoming packets containing no recognizable destination port information will be redirected to the DMZ’s IP address.
  • Page 32 NAT (Manual Entry) From this page you may manually add entries into the Address Translation Table. Click Add New Group when each is complete.

  • Page 33: Ip Filter

    IP Filter Your AirStation comes pre-configured with basic rules. You may choose which of these to use by clicking on Add/Delete Basic Rules and turning to the next page. To make a custom rule, click on Configure IP Filter (page 35).
  • Page 34 IP Filter (Add/Delete Basic Rules) Get here by clicking on Add/Delete Basic Rules from the previous page. You may choose which of AirStation’s preconfigured basic rules are enabled or disabled. Active rules are displayed with a green background, and disabled rules are shown in red. Choose the rules you want to use by clicking under Operation.
  • Page 35 IP Filter (Configure IP Filter) Clicking on Configure IP Filter from the IP filter page (page 33) will bring you to this page, where you can make your own rules. Click Add Rule when you have each rule configured the way you want it.

  • Page 36: Intrusion Detector

    Network Configuration (Intrusion Detector) To enable intrusion detector, choose Enable or Enable (Apply packet filter rules) from the Intrusion Detector drop-down box. If packet filter rules are applied, packets will be filtered with packet filter rules before Intrusion Detector is applied. Blocking IP spoofing blocks packets from devices using an IP address that is not their own.

  • Page 37: Upnp

    UPnP You may disable Universal Plug and Play functionality by unchecking Enable here. Note that Windows Live™ Messenger may not function correctly with UPnP disabled.

  • Page 38: Wireless Configuration

    AOSS Clicking Start AOSS Sequence has the same function as pushing the AOSS button on the router: it initiates the AOSS process. If all your clients support AOSS, it’s very simple to set them up. Press the AOSS button on the router, or the one on this page, and then push the AOSS button on the client device.

  • Page 39: 802.11G

    802.11g (Basic) If you have a mixed mode network, with both 802.11b and 802.11g clients, it’s recommended that you check 11g protection to ensure that slower 11b clients don’t hog all available bandwidth. Choosing Auto for Wireless mode lets both 802.11b and 802.11g clients connect to the network.

  • Page 40: Security

    802.11g (Security) Buffalo recommends that you choose the strongest form of encryption that’s supported by all your client devices. • WEP is better than nothing, and almost every wireless device ever made supports it. • TKIP is slower than WEP but much more secure.

  • Page 41: Repeater

    Bridge/Repeater (WDS Bridging) When configuring a bridge between two or more wireless access points, WDS must be enabled here. For instructions on configuring a WDS bridge, see page 56, or click on Help at the top right corner of the screen.

  • Page 42: Mac Access Limit

    MAC Access Limit You may limit access to your wireless network to specific computers. Computers not listed on your MAC Registration List will not be able to connect to the network. If you enable this, click Edit Registration List to add MAC addresses to your registration list.
  • Page 43 MAC Access Limit (Edit Registration List) Advanced Settings Enter a MAC address and click Apply for each client that’s going to be accessing the network.

  • Page 44: Admin Configuration

    Admin Configuration (Name/Password) Here, you can change your AirStation’s name on the network and the administrator password. The name of the administrator account is fixed as “root”. If you have many AirStations on your network, having clear, descriptive names for each can make them much easier to administrate.

  • Page 45: Date/Ntp

    Admin Config (Date/NTP) You may set the time and date on your AirStation by entering it manually, and then clicking Apply. You may also click Acquire Current Time from your PC to set time and date automatically to match the PC you’re using to set it up.

  • Page 46: Syslog Transfer

    Syslog Transfer If you have a syslog server on your network, you may send logs to it. Check Enable to have logs transferred. Enter the address of your Syslog Server, check the logs you want transferred, and click Apply.

  • Page 47: Save/Load Configuration

    Save/Load Configuration Once your AirStation’s configured the way you want it, you can save the configuration here. You’ll need the current administrator password to restore the configuration from the backup file later. Click Help at the top right corner of the page for more information on backing up and recovering system configuration files.

  • Page 48: Initialize/Reboot

    Initialize/Reboot Click Restart Now to restart your AirStation. Click Initialize Now to restore your AirStation to factory defaults and restart it. You may also initialize your AirStation by holding down the Init button on the bottom of the router for 3 seconds.

  • Page 49: Firmware Update

    Firmware Update Click Browse to select your firmware update file. Then, click the Firmware Update button to update firmware. Firmware Update may take several minutes to complete. Do not power down the router until Firmware Update is finished and the diag light on the front of the router has stopped blinking.

  • Page 50: Diagnostic

    System Information The System Information page lists all the setup information for your AirStation. It can be very handy for setting up clients that don’t support AOSS.

  • Page 51: Logs

    Logs Here you can choose what information gets logged and see recent log entries.

  • Page 52: Packet Traffic Info

    Packet Traffic Information Here, you can see the packets and errors for each of your networks.

  • Page 53: Client Monitor

    Client Monitor Client Monitor shows you a list of all clients currently connected to the wireless network.

  • Page 54: Ping

    Ping To perform a Ping, enter a target (such as 192.168.11.2 or www. buffalotech.com) and click Execute. Successful pings return “64 bytes from . . .” messages. If the ping returns “Connection failed” or other errors, something is preventing you from communicating successfully with your target.

  • Page 55: Connecting To An Existing Network

    Connecting to a Preexisting Network To add an AirStation to a network without changing the existing LAN configuration, proceed as follows: 1. Put the AirStation in AP mode by moving the switch on the bottom from AUTO to BRI. 2. Connect one of the AirStation’s LAN ports to an existing router or switch on your network.

  • Page 56: Wds Bridging

    Configuring a WDS Bridge Your AirStation’s WDS bridging capability allows you to extend the size of your wireless network by adding additional AirStations, all connected wirelessly. In this simple example, we’ll connect two AirStations in a wireless bridge. You may use these same steps to add additional bridges for greater coverage.* For easiest configuration, we recommend configuring all components in close proximity before...
  • Page 57 Configuring a WDS Bridge Connect a PC’s Ethernet port to another RJ-45 port on the main router (the first AirStation). You will use this PC to configure the settings of the AirStations. Here’s the whole setup, ready for initial configuration. Note: Each AirStation may be part of 6 different bridges.
  • Page 58 Configuring a WDS Bridge Once the AirStations are powered on, you will want to make sure that they are in factory default configuration. On the bottom of each, hold down the “INIT” button for three seconds. This will reset them to factory defaults. They will take 30-60 seconds to reboot afterwards.
  • Page 59 Configuring a WDS Bridge The Web Admin Tool for your first AirStation will open. Click on the Advanced tab. On the left side menu, click on Wireless Config, and then Basic. Change the Wireless Channel from Auto to a channel. Make a note of the channel that you’ve chosen, because all of your wireless devices will need to be configured to use this same channel.
  • Page 60 Configuring a WDS Bridge On the left-side menu, click on Wireless Config, and then Repeater. Repeater-Bridge (WDS) must be set to Enable. If it is not, change it to Enable in the drop down menu and click Apply. After the AirStation reboots, the screen will refresh.
  • Page 61 Configuring a WDS Bridge Now, you need to configure the second AirStation with the MAC address of the first one. In your browser’s address field, enter “192.168.11.100”. This will take you into the Web-Based Configuration Utility for the second AirStation. Once again, the username is “root”...
  • Page 62 Configuring a WDS Bridge In the Web-Based Configuration Utility, click on the Advanced tab, select Wireless Config, and choose Basic. Change the wireless channel to match the one you set for the first AirStation. Change Framebursting from 125 High Speed Mode to Framebursting or Do not use (whichever you chose for the first AirStation).
  • Page 63 Configuring a WDS Bridge Under Add New WDS Partner Access Point, enter the wireless MAC address of the first AirStation (available from the bottom of the first AirStation), with each pair of digits separated by a colon, e.g. MAC:000D0B10F779 would be entered 00:0D:0B:10:F7:79.
  • Page 64 Configuring a WDS Bridge Once you can connect to each of your access points, you should configure WEP encryption. Without WEP, anyone within range of your access points can easily connect to your network. From within the second AirStation’s Web-Based Configuration Utility (192.168.11.100), click on Advanced, then Wireless Config, then Security.
  • Page 65 Configuring a WDS Bridge Hexadecimal Input - 26 digits (Hex WEP128 104 bit, key should contain 26 characters A-F, 0-9) Hexadecimal Input - 10 digits (Hex WEP64 40 bit, key should contain 10 characters A-F, 0-9) Enter at least one encryption key in the first encryption key space. The key should match the format of the chosen WEP encryption type.

  • Page 66: Troubleshooting Wds

    Troubleshooting WDS • Most problems with setting up WDS are caused by incorrectly entering the MAC addresses into each AirStation’s Web-Based Configuration Utility. If you’re having problems, check the MAC address settings in both AirStations’s Web-Based Configuration Utilities. Each AirStation should be configured to be in a bridge with the other’s wireless MAC address.

  • Page 67: Antennas

    Antennas The WHR-HP-G54 has two antennas, one internal and one external. The external antenna will usually give the best performance if oriented to point straight up. If your AirStation is resting on its side, use the antenna’s swivel and twist function to orient it pointed upward.

  • Page 68: Specifications

    Specifications For more information, FAQs, and updates, consult the Buffalo Technology website at www.buffalotech.com. WHR-HP-G54 AirStation Specifications Physical Specifications Dimensions 1.1 x 5.1 x 5.7 in. (28 x 130 x 144mm) Weight 9.8 oz. lb. (277g) Temperature & Humidity Operation 0˚ to 40˚ C Maximum humidity 80% Transit/Storage 0˚...
  • Page 69 Specifications Regulatory Information Wireless communication is often subject to local radio regulations. Although AirStation wireless networking products have been designed for operation in the license-free 2.4 GHz band, local radio regulations may impose limitations on the use of wireless commu- nication equipment.
  • Page 70 Specifications Modulation Technique Direct Sequence Spread Spectrum • ODFM for High Transmit Rate • DQPSK for Standard Transmit Rate • DBPSK for Low Transmit Rate Spreading 11-chip Barker Sequence Nominal Output Power: 19dBm (802.11b), 16dBm (802.11g) Transmit Rate: • High Speed 54 Mbps (125 Mbps in 125* High Speed Mode) •...
  • Page 71 Specifications Semi-Open Office Environment 50 m (165 ft.) 70 m (230 ft.) 90 m (300 ft.) 115 m (375 ft.) Closed Office 25 m (80 ft.) 35 m (115 ft.) 40 m (130 ft.) 50 m (165 ft.) Receiver Sensitivity -83 dBm -87 dBm -91 dBm -94 dBm (depends on data rate) Delay Spread (at FER of <1%) 65 ns 225 ns 400 ns 500 ns (depends on data rate) •...
  • Page 72 Specifications Note: The range values listed in Table “Radio Characteristics” are typical distances as measured at Buffalo Technology AirStation laboratories. These values are provided for your guidance but may vary according to the actual radio conditions at the location where the AirStation product is installed. AirStation IEEE 802.11 Channel Sets The range of the wireless signal is related to the Transmit Rate of the wireless communication.

  • Page 73: Troubleshooting

    Troubleshooting Common Problems • Out of range, client cannot connect to the AirStation. • Configuration mismatch, client cannot connect to the AirStation. • Absence or conflict with the Client Driver. • Conflict of another device with the AirStation hardware. LED Activity Monitoring LED activity may help identify problems.
  • Page 74 Troubleshooting LEDs Work But Client PC Cannot Connect to Network If the LEDs indicate that the network is working properly (Power LED is on, Transmit/ Receive LED blinks), check the TCP/IP settings of the network. Changing Client TCP/IP Settings in Windows Consult the LAN Administrator for correct TCP/IP settings.

  • Page 75: Glossary

    Glossary 10BaseT: 802.3 based Ethernet network Bandwidth: The transmission capacity of that uses UTP (Unshielded twisted pair) a computer or a communication channel, cable and a star topology. 10 Mbps data usually stated in Megabits per second transmission speed. (Mbps). 100BaseT: 802.3 based Ethernet network Bridge: A device which forwards traffic that uses UTP (Unshielded twisted pair)
  • Page 76 Glossary DHCP (Dynamic Host Configuration Ethernet cable: A wire similar to telephone Protocol): Based on BOOTP, it uses a pool cable that carries signals between Ethernet of IP addresses, which it assigns to each devices. It is designed to connect a single device connected to it, and retrieves the device’s NIC to a router, switch, or hub.
  • Page 77 Glossary Hub: A device which allows connection LAN (Local Area Network): A group of computers and other devices to form a of computers and peripheral devices LAN. connected to share resources. IEEE (Institute of Electrical and LED (Light Emitting Diode): The lights Electronics Engineers): The professional on a hardware device representing the organization which promotes development...
  • Page 78 Glossary NAT (Network Address Translation): An Plug and Play: Hardware that, once physically internet standard that enables a LAN to installed, finishes its installation automatically use one set of IP addresses for internal and may immediately be used, as opposed traffic and a second set for external traffic.
  • Page 79 Glossary RJ-45 connector: An 8-pin connector SSID: The “name” of your wireless used between a twisted pair cable and a network. You can get it from the Setup data transmission device. page of the configuration utility. ROM (Read Only Memory): Memory STP (Shielded Twisted Pair): Twisted Pair hardware that allows fast access to cable wrapped in a metal sheath to provide...
  • Page 80 Glossary UDP (User Datagram Protocol): A using wireless devices. communication method (protocol) WPA Encryption: An encryption algorithm that offers a limited amount of service designed to improve on the security of when messages are exchanged between WEP. computers in a network. UDP is used as WPA2 Encryption: An advanced AES- an alternative to TCP/IP.

  • Page 81: Fcc Information

    FCC / CE Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 82 FCC / CE Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important Note - FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment.
  • Page 83 Important Note - Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. European Union Notice: Radio products with the CE marking comply with the R&TTE Directive (1999/5/EC), the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
  • Page 84 the computer manufacturer must therefore be allowed at all times to ensure the safe use of the equipment. Intended use This device is a 2.4 GHz wireless LAN transceiver, intended for indoor home and office use in USA, Canada, all EU and EFTA member states. EU Countries intended for use This device is intended for indoor home and office use in the following countries: Austria, Belgium, Denmark, France, Finland, Germany, Greece, Italy, Ireland, Luxembourg,...
  • Page 85 In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain an authorization to use the device for setting up outdoor radio links. In Belgium there is a restriction in outdoor use. The frequency range in which outdoor operation in Belgium is permitted is 2460 –...

  • Page 86: Environmental Information

    Environmental Information • The equipment that you have purchased has required the extraction and use of natural resources for its production. • The equipment may contain hazardous substances that could impact health and the environment. • In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems.

  • Page 87: Warranty Information

    Warranty Information Buffalo Technology (Melco Inc.) products come with a two-year limited warranty from the date of purchase. Buffalo Technology (Melco Inc.) warrants to the original purchaser the product; good operating condition for the warranty period. This warranty does not include non-Buffalo Technology (Melco Inc.) installed components.

  • Page 88: Contact Information (Usa)

    Contact Information (North America) Buffalo Technology USA Inc. 11100 Metric Blvd, Suite 750 Austin, TX 78758 GENERAL INQUIRIES Monday through Friday 8:30am-5:30pm CST Direct: 512-794-8533 | Toll-free: 800-456-9799 | Fax: 512-794-8520 | Email: sales@ buffalotech.com TECHNICAL SUPPORT North American Technical Support by phone is available 24 hours a day, 7 days a week. (USA and Canada).

  • Page 89: Contact Information (Europe)

    Contact Information (Europe) Buffalo Technology UK Ltd. 2 Bracknell Beeches, Old Bracknell Lane Bracknell, Berkshire, RG12 7BW United Kingdom GENERAL INQUIRIES Email: sales@buffalo-technology.com TECHNICAL SUPPORT Buffalo Technology provides technical support in English, German, French, Italian, and Spanish. For opening hours and relevant telephone numbers, please go to www.buffalo-technology.com/contact...

  • Page 90: Gpl Information

    GPL Source Code Source code for Buffalo products that use GPL code is available at http://opensource.buffalo.jp.
  • Page 91 125* High Speed Mode * When operating in High-Speed Mode, this Wi-Fi device achieves an actual throughput of up to 34.1 Mbps, which is equivalent to the throughput of a system following 802.11g protocol and operating at a signaling rate of 125 Mbps.

Table of Contents