SMT-i SERIES
ADMINISTRATOR DOCUMENT
Quick Overview
In order to set up the phone or perform the software upgrade, the administrator needs
to enter the phone to the engineering mode.
Initial setup
Re-configuration
Software Upgrade
Method 1: pull from
the phone (phone is
required to register
to the system)
Method 2: push
from MMCs (phone is
required to register
to the system)
Method 3: use USB
memory (phone is
not required to
registered to the
system)
i3105/i5210/i5220/i5230
•
Enter to the engineering mode
•
Select "Easy Install" menu to set
up the phone
•
Enter to the engineering mode
•
Select "Easy Install" menu to set
up the phone
•
Run TFTP server software on PC
•
Enter to the engineering mode
•
Select "S/W upgrade"
•
Select "TFTP Server" and enter the
PC IP address
•
Start upgrade
•
MMC 841:
o
Enter PC (server) IP
address
o
Enter 4 digits software
version
•
MMC 840; enable and start
software upgrade
3
QUICK REFERENCE DOCUMENT
i5243
•
Power up the phone and
follow on screen instructions
•
Enter to the engineering mode
•
Select "Easy Install" menu to
set up the phone
•
Run TFTP/HTTP server
software on PC
•
Enter to the engineering mode
•
Select "S/W upgrade"
•
Select "TFTP or HTTP" type
and enter the PC IP address
•
Start upgrade
•
MMC 841:
o
Enter PC (server) IP
address
o
Enter 4 digits software
version
•
MMC 840; enable and start
software upgrade
•
Copy software to the root
directory of the USB memory
•
Plug-in USB memory to the
phone
•
Enter to the engineering mode
•
Select "Software upgrade"
•
Select "USB" type
•
Start upgrade
MAY 2010