SMT-i SERIES
ADMINISTRATOR DOCUMENT
Quick Setup Guide
Initial Configuration
SMT-i3105/5210/5220/5230 IP Phones
• Press and hold '*' key while powering up the phone to enter the configuration
menu.
• Select "Easy Install"
o Select Dynamic IP if DHCP service is available.
If select static IP address, the IP address must be in the same subnet range
as the OfficeServ system.
o Select OSPP (KP) as the system type
o Skip unused settings such as VLAN, 802.1x, etc.
o Enter OfficeServ system IP address
Ex. 192.168.1.10
o Enter system ID. This is the phone ID found in MMC 840.
Ex. 3201
o Enter password. This is the phone password found in MMC 840.
Ex. 1234
SMT-i5243 Phones
• Power up the phone and follow the on screen instructions.
o Press Next to advance to next screen
o Press Next to skip language and key pad type
o Enter
Server IP: 192.168.1.10 (OfficeServ system IP address)
ID: 3201 (phone ID)
Password: 1234 (phone password)
Server type: OfficeServ
o Press Next to advance to next screen
o Mode:
Select Dynamic IP if DHCP service is available.
If select static IP address, the IP address must be in the same subnet range
as the OfficeServ system.
5
QUICK REFERENCE DOCUMENT
MAY 2010