Download Print this page
   

Advertisement

SMT-i5210 Quick Reference Guide
SCM Default Feature Codes
SCM
While the most frequently used features appear as dedicated buttons on your phone, there are a
host of additional features that can be used by dialing the default codes listed in the table below.
Some feature codes require an extension, group number or orbit number. When using these
codes, replace the letter X with the appropriate digits. For example; to pick up a ringing call at
extension 2205, us the Direct Call Pickup code *0X# where X is 2205. User dials *02205#
Feature
All Feature Clear
Auto Answer Mode - Cancel
Auto Answer Mode - Set
Auto Retry of Busy Number - Cancel
Auto Retry of Busy Number - Set
Barge-In with Tone
Barge-In without Tone
Callback - Cancel
Callback - Set
Call Forward All - Cancel
Call Forward All - Set
Call Forward Busy - Cancel
Call Forward Busy - Set
Call Forward Busy/No Answer - Cancel
Call Forward Busy/No Answer - Set
Call Forward No Answer - Cancel
Call Forward No Answer - Set
Call Forward Clear All
Note: The system administrator may have set your system up so users do not need to
dial the #. If so you can ignore the # in the code.
Condition
Phone Status Indicator
Busy
Steady RED
Ringing
Flashing RED
Voice
Flashing GREEN
Message
Version 1.2
Default Feature Codes
Code
Feature
*99#
Call Park Extension
*430#
Call Park Orbit
*431#
Conference
*170#
Conference on Answer
*171#
Direct Call Pickup
*23X#
DND - Cancel
*24X#
DND - Set
*160#
DND Override
*161#
Group Call Pickup
*610#
Group Call Forward - Cancel
*611X#
Group Call Forward - Set
*620#
In/Out of Hunt Group - In
*621X#
In/Out of Hunt Group - Out
*640#
Station Paging
*641X#
Voice Mail Access
*630#
Voice Mail Memo
*631X#
Voice Mail Transfer
*60#
SMT-i5210 IP Phone Quick Reference Guide
For more information on your phone settings and features see the SMT-i5210 User Guide
Code
*11#
*10X#
*89#
*81X#
*0X#
*400#
*401#
*25#
**#
*680X#
*681X#
*531X#
*530#
*55#
*88#
##
Phone status indicator
*87#
Soft button
Conference button
Transfer button
Hold button
UC dial
Navigation Ring &
OK Button
14 Programmable buttons
Dial button
Speaker button
Headset button
Volume button
Mute button
Service button
Message button
Phonebook button
LCD screen
Handset
May 2015
Name
Shows the phone's status
Selects function from the LCD soft menus
Makes a conference call
Transfer calls
Holds a call temporarily without hanging up
L> Call Forward C>idle position R >DND
Move Left/Right/Up/Down in the display
Press center OK button to make a selection
Can assign various features with LED indication
Enters numbers and characters
Toggles the Speaker on or off
Toggles the Headset on or off
Set Volume for Ringing, Handset, Speaker
Toggles the microphone on or off
Displays the UC service menus
Displays the message menu
Displays phone book lists
Shows call info, menus and status icons
Use for private conservations
SCM
Samsung Communication Manager
Function

Advertisement

   Summary of Contents for Samsung SMT-i5210

  • Page 1

    SMT-i5210 IP Phone Quick Reference Guide Default Feature Codes For more information on your phone settings and features see the SMT-i5210 User Guide While the most frequently used features appear as dedicated buttons on your phone, there are a host of additional features that can be used by dialing the default codes listed in the table below.

  • Page 2

    SMT-i5210 Quick Reference Guide Answering a Call Call Forwarding   Press [Menu]  scroll to Call Forward/DND Pick up the Handset or press the Speaker button to use the speakerphone  Scroll to call forward type then select by pressing the OK button Making an outside call (local or long distance) ...

This manual also for:

Smt-i5220s

Comments to this Manuals

Symbols: 0
Latest comments: