Basic Operation - Panasonic WH-SD24BE5 Operating Instructions Manual

BASIC OPERATION

BASIC OPERATION
WATER INLET
OFF / ON
SETTING
SET
Operation details (Default setting) Operation details (Default setting)
• Operation takes place under default settings as follows:
- When Outdoor ambient temperature (Out Lo) is less than 0°C, water outlet set temperature (H2O Lo) is 50°C.
- When Outdoor ambient temperature (Out Hi) is more than 15°C, water outlet set temperature (H2O Hi) is 32°C.
• In between the specifi ed outdoor ambient temperature range (Out Lo and Out Hi), the system will automatically adjust
the water outlet temperature between specifi ed range (H2O Lo and H2O Hi).
• Lower outdoor ambient temperature will result in higher water outlet temperature and vice versa.
Optional Settings Optional Settings
Error code reset
ERROR
RESET
• Not usable during normal operation.
System Pump Down
PUMPDW
• Not usable during normal operation.
• If accidentally pressed the
ERROR
STATUS
CHECK
OFF / ON
, press
PUMPDW
Operation Start / Stop Operation Start / Stop
• The unit starts by pressing
• When unit is ON, operation LED is lit and the actual
temperature for water outlet, water inlet and outdoor
ambient are shown on the control panel display.
OFF / ON
• Press again to stop the operation.
to stop the pump down operation.
OFF / ON
.
5