Mitsubishi Electric MXZ-2C30VA Service Manual page 124

OPERATING PROCEDURE
2. Removing the control P.C. board/outdoor control
P.C. board, the reactor and the power board/outdoor
power P.C. board
(1) Remove the service panel and the top panel (Photo 1).
(2) Disconnect the connectors on the control P.C. board (MXZ-
6C120VA)/outdoor control P.C. board (MXZ-6C122VA).
Remove the screws of the the control P.C. board (MXZ-
6C120VA)/outdoor control P.C. board (MXZ-6C122VA), and
remove the control P.C. board (MXZ-6C120VA)/outdoor
control P.C. board (MXZ-6C122VA).
(3) Remove the screws of the reactor cover, and remove the
reactor cover.
(4) Remove the screws of the reactor, and remove the reactor.
(5) Remove the screws of the power board (MXZ-6C120VA)/
outdoor power P.C. board (MXZ-6C122VA), and remove
the power board (MXZ-6C120VA)/outdoor power P.C. board
(MXZ-6C122VA).
Photo 6
Screws of the reactor cover
Photo 7
Screws of the power
board
Screws of the reactor
OBH584E
Photo 3
Screws
of the
electrical
parts
Photo 4
Screws
of the
electrical
parts
Photo 5
Screws of the control P.C. board
(MXZ-6C120VA)/outdoor control P.C.
board (MXZ-6C122VA)
124
PHOTOS