Battery Disposal - Jump n Carry JNC300XL Instruction Manual

Portable jump starter
Hide thumbs Also See for JNC300XL:
Table of Contents

Advertisement

Available languages

Available languages

1. The jump starter comes with a wall mount charger.
2. Plug the charger cord into the Recharge Jack on the front of the unit.
3. Plug the wall charger into an AC outlet.
4. The right LED will turn on while the charger is plugged into AC power to indicate the
unit is charging.
5. We do not recommend charging the unit for more than 24 hours under normal
usage. Suggested recharge times are:
• Recharge the unit for 3 hours when the unit is used for jump starting
• Recharge the unit for 12-24 hours under very high discharge conditions
6. Press and hold the red button to check the battery charging status. When the unit is
fully charged, all LED's will light.
The jump starter is equipped with a built-in LED flashlight. The portability of the unit
makes the jump starter extremely useful in times of emergency, recreation and general
use. Simply press the yellow button to turn the light on or off.
The jump starter may be stored virtually anywhere, and in any position, though we
recommend storing the unit upright. However, take precautions to ensure that the positive
Despliegue LED - La prensa y tiene el bot—n rojo
and negative clamps do not come into contact with each other or a common metal
surface. We recommend storing the jump starter in the box in which it was originally
received.
Pb
The jump starter battery may be removed by unscrewing the perimeter screws on the
back cover. Disconnect the wires from the battery terminals. Note the position of the
battery and wire locations.
LED Ausstellung - Presse und hŠlt roten Knopf
Recharging
4 Lichter . . . . . . . . . Laden vollständig
Immer auf, wenn Auflader angeschlossen ist
3 lights . . . . . . . . . . Good
2 lights . . . . . . . . . . Medium
1 light . . . . . . . . . . . Low
Flashing . . . . . . . . . Recharge Unit
Always On
*
Please note this light indicates the charger is working.
LED Display - Press and hold red button
4 lights when plugged in... Charging complete
Always On When Charger is Plugged In
Flashlight
3 luces . . . . . . . . . . Bueno
2 luces . . . . . . . . . . Medio
1 luz . . . . . . . . . . . . Bajo
Destellar . . . . . . . . . Recargue la Unidad
Siempre En
*
Note por favor que esta luz indica el corcel trabaja.
4 luces . . . . . . . . . . Cargar completo
Siempre En

Battery Disposal

This unit contains a sealed non-spillable lead-acid battery.
3 lumières . . . . . . . . Bon
This battery must be recycled. Consult your state or local
2 lumières . . . . . . . . Milieu
government concerning regulations for proper disposal.
1 lumière. . . . . . . . . Niveau bas
Flashing . . . . . . . . . Recharger l'Unité
Toujours Sur
*
S'il vous plaît noter cette lumière indique que le chargeur travaille.
Exposition LED - La presse et tient le bouton rouge
When Charger is Plugged In*
Cuándo Corcel se Conecta*
Storage
Cuándo Corcel se Conecta
Quand le Chargeur Est Branché sur*

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents