General Power Tool Safety Rules - Ryobi RHT500R Operator's Manual

FR
EN DE ES
EN
FR DE ES
DE
FR EN ES
ES
FR EN DE
Your hedge trimmer has been engineered and
manufactured to Ryobi's high standard for dependability, IT
FR EN DE ES
ease of operation, and operator safety. When properly
cared for, it will give you years of rugged, trouble-free
FR EN DE ES IT
performance.
FR EN DE ES IT
Thank you for buying a Ryobi product.
FR EN DE ES IT
WARNING:
To reduce the risk of injury, the user must read and
FR EN DE ES IT
understand the operator's manual before using this
product.
FR EN DE ES IT

GENERAL POWER TOOL SAFETY RULES

FR EN DE ES IT
FR EN DE ES IT
WARNING:
Read all safety warnings and all instructions.
FR EN DE ES IT
Failure to follow the warnings and instructions may
result in electric shock, fire and serious injury.
FR EN DE ES IT
Save all warnings and instructions for future
FR EN DE ES IT
reference.
The term "power tool" in the warnings refers to your
FR EN DE ES IT
mains-operated corded power tool or battery-operated
(cordless) power tool.
FR EN DE ES IT
WORK AREA SAFETY
FR EN DE ES IT
■ Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
FR EN DE ES IT
■ Do not operate power tools in explosive
atmospheres, such as in the presence of
FR EN DE ES IT
flammable liquids, gases or dust. Power tools
FR create sparks which may ignite the dust or fumes. EN DE ES IT
■ Keep children and bystanders away while
FR EN DE ES IT
operating a power tool. Distractions can cause you
to lose control.
FR EN DE ES IT
ELECTRICAL SAFETY
■ Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
■ Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
■ Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
■ Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
■ When operating a power tool outdoors, use an
IT PT NL SV DA
IT PT NL SV DA
english(original instructions)
IT PT NL SV DA
IT PT NL SV DA
PT NL SV DA
PT
NL SV DA
NL
PT SV DA
SV
PT NL DA
DA
PT NL SV
NO
PT NL SV DA
PT NL SV DA NO
PT NL SV DA NO
PT NL SV DA NO
PT NL SV DA NO
PT NL SV DA NO
PT NL SV DA NO
PT NL SV DA NO
PT NL SV DA NO
PT NL SV DA NO
PT NL SV DA NO
PT NL SV DA NO
PT NL SV DA NO
PT NL SV DA NO
NO FI HU CS RU
NO FI HU CS RU
NO FI HU CS RU
NO FI HU CS RU
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
NO FI HU CS RU
electric shock.
■ If operating a power tool in a damp location is
NO FI HU CS RU
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
NO FI HU CS RU
electric shock.
NO FI HU CS RU
PERSONAL SAFETY
NO FI HU CS RU ■ Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
FI HU CS RU
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
FI
HU CS RU
moment of inattention while operating power tools
may result in serious personal injury.
HU
FI CS RU
■ Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
CS
FI HU RU
mask, non-skid safety shoes hard hat, or hearing
protection used for appropriate conditions will reduce
RU
FI HU CS
personal injuries.
■ Prevent unintentional starting. Ensure the
FI HU CS RU
switch is in the off-position before connecting
to power source and /or battery pack, picking up
FI HU CS RU RO
or carrying the tool. Carrying power tools with your
finger on the switch or energising power tools that
FI HU CS RU RO
have the switch on invites accidents.
■ Remove any adjusting key or wrench before
FI HU CS RU RO
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
FI HU CS RU RO
result in personal injury.
■ Do not overreach. Keep proper footing and
FI HU CS RU RO
balance at all times. This enables better control of
the power tool in unexpected situations.
FI HU CS RU RO
■ Dress properly. Do not wear loose clothing or
FI HU CS RU RO
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or
FI HU CS RU RO
long hair can be caught in moving parts.
■ If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
POWER TOOL USE AND CARE
■ Do not force the power tool. Use the correct
power tool for your application. The correct power
tool will do the job better and safer at the rate for
which it was designed.
■ Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
■ Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools. Such
preventative safety measures reduce the risk of
starting the power tool accidentally.
■ Store idle power tools out of the reach of children
6
RO PL SL HR ET
RO PL SL HR ET
RO PL SL HR ET
RO PL SL HR ET
RO PL SL HR ET
RO PL SL HR ET
RO PL SL HR ET
RO PL SL HR ET
RO PL SL HR ET
RO PL SL HR ET
RO PL SL HR ET
RO PL SL HR ET
RO PL SL HR ET
RO PL SL HR ET
RO
PL SL HR ET
PL
SL HR ET
SL
PL HR ET
HR
PL SL ET
ET
PL SL HR
PL SL HR ET
PL SL HR ET
PL SL HR ET
PL SL HR ET
LT LV SK BG
LT LV SK BG
LT LV SK BG
LT LV SK BG
LT LV SK BG
LT LV SK BG
LT LV SK BG
LT LV SK BG
LT LV SK BG
LT LV SK BG
LT LV SK BG
LT LV SK BG
LT LV SK BG
LT LV SK BG
LT LV SK BG
LT LV SK BG
LT LV SK BG
LT LV SK BG
LT LV SK BG
LT
LV SK BG
LV
LT SK BG
SK
LT LV BG
BG
LT LV SK