Bosch AL 1860 CV User Manual page 7

Hide thumbs Also See for AL 1860 CV:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 6
OBJ_BUCH-889-005.book Page 7 Monday, December 16, 2013 10:50 AM
 Do not cover off the ventilation slots of the battery
charger. Otherwise, the battery charger can overheat and
no longer operate properly.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Product Features
The numbering of the product features refers to the illustra-
tion of the battery charger on the graphics page.
1 Battery pack*
2 Green battery charge indicator
3 Red battery charge indicator
4 Charging compartment
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Battery Charger
Article number
Output voltage (automatic volt-
age detection)
Charging current
Allowable charging temperature
range
Charging time for battery capac-
ity, approx.
– 1,3 –1,5 Ah
– 2,0 Ah
– 2,6 –3,0 Ah
– 4,0 Ah
– 5,0 Ah
Number of battery cells
Weight according to
EPTA-Procedure 01/2003
Protection class
Please observe the article number on the type plate of your battery
charger. The trade names of individual battery chargers may vary.
Operation
Starting Operation
 Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the name-
plate of the battery charger. Battery chargers marked with
230 V can also be operated with 220 V.
Bosch Power Tools
Charging Procedure
The charging procedure starts as soon as the mains plug of
the battery charger is plugged into the socket outlet and the
battery 1 is inserted into the charging compartment 4.
Due to the intelligent charging method, the charging condi-
tion of the battery is automatically detected and the battery is
charged with the optimum charging current, depending on
battery temperature and voltage.
This gives longer life to the battery and always leaves it fully
charged when kept in the charger for storage.
Meaning of the Indication Elements
Flashing Green Battery Charge Indicator 2
Note: The rapid-charging procedure is only possible when the
battery temperature is within the allowable charging temper-
ature range, see section "Technical Data".
Continuous Lighting of the Green Battery Charge Indica-
tor 2
AL 1860 CV
Additionally, a signal tone sounds for approx. 2 seconds,
2 607 225 3..
which acoustically indicates that the battery is fully charged.
Afterwards, the battery can be removed for immediate use.
V
10,8 – 18
When the battery is not inserted, continuous lighting of the
A
6.0
battery charge indicator 2 indicates that the mains plug is in-
serted in the socket and that the battery charger is ready for
°C
0 – 45
operation.
Continuous Lighting of the Red Battery Charge Indicator 3
(80%)
100%
min
(10)
25
min
(15)
35
min
(20)
35
section "Technical Data". As soon as the allowable charging
min
(30)
45
temperature range is reached, the battery charger automati-
min
(45)
65
cally switches to rapid charging.
3 – 10
Flashing Red Battery Charge Indicator 3
kg
0.8
/ II
Troubleshooting
ures
Cause
Flashing red battery charge indicator 3
No charging procedure possible
Battery not (properly) insert-
ed
English | 7
The rapid-charging procedure is signalled
by a flashing green battery charge indica-
tor 2.
Continuous lighting of the green battery
charge indicator 2 indicates that the bat-
tery is fully charged.
Continuous lighting of the red battery
charge indicator 3 indicates that the tem-
perature of the battery is not within the al-
lowable charging temperature range, see
A flashing red battery charge indicator 3
indicates a different malfunction of the
charging procedure, see section "Trouble-
shooting – Causes and Corrective Meas-
ures".
Causes and Corrective Meas-
Corrective Measure
Properly insert battery into
battery charger
1 609 92A 0F3 | (16.12.13)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents