Timer Mode; Alert Sound & Led Status Light; Start/Stop; Bluetooth Pairing - Oregon Scientific AW133 User Manual

TIMER MODE

In Timer mode ( ), you can directly set a timer program
for your grilled food. Once the timer starts, the time will
be counted down. However, if you do not stop the timer,
it will continue counting up until you stop it.
Set timer:
1. Tap -/+ to select a timer format: HH:MM (hour:minute)
or MM:SS (minute: second). Tap SET to confirm
setting.
2. Tap -/+ to adjust the value (up to 23 hours 59 minutes
and 59 seconds). Tap SET to confirm the setting.
ALERT SOUND & LED STATUS LIGHT
There are four sorts of LED backlight displayed on the
screen while showing different cooking level of your
grilled food.
If you do not want any LED light to be on, switch off the
LIGHT button in the battery compartment.
Cooking Pre-alert
LED Color Yellow Amber
Alert
n/a 4 beeps
Sound

START/STOP

If you want to switch among different cooking modes,
you need to stop the current one, and then redo settings.
Start program:
After setting is done, press START to start the
measurement program.
Stop setting:
• During any setting, press START to interrupt the
Start setting:
• Once you stop a setting and redo a new mode

BLUETOOTH PAIRING

You can download an application and control and view the
BBQ thermometer through Bluetooth®v4.0 technology.
Press and hold – and + at the same time to enable the
pair-up mode. The pairing progress takes up to 30 seconds,
Ready Over cook
is successful every time when connection.
Flashing
Red
in red
4 beeps/ 8 beeps/
second second
7
setting and return to idle mode.
setting, press SET.
flashes during pairing, and will be on when the pairing