Brother MFC-J480DW User Manual page 58

Error Code Problem and Recommended Solutions
TS-06 The wireless security information (Authentication method/Encryption method/
Network Key) is incorrect.
Confirm the wireless security information (Authentication method/Encryption
method/Network Key) listed in TS-04. If your router uses WEP encryption,
enter the key used as the first WEP key. Your Brother machine supports the
use of the first WEP key only.
TS-07 The machine cannot detect a wireless access point/router that has WPS or
AOSS
If you would like to configure your wireless settings using WPS or AOSS
you must operate both your machine and the wireless access point/router.
Confirm that your wireless access point/router supports WPS or AOSS
try starting again.
If you do not know how to operate your wireless access point/router using
WPS or AOSS
point/router, ask the manufacturer of your wireless access point/router, or ask
your network administrator.
TS-08
Two or more wireless access points that have WPS or AOSS
detected.
• Confirm that only one wireless access point/router within range has the
WPS or AOSS
• Try starting again after a few minutes to avoid interference from other
access points.
™
enabled.
™
, see the documentation provided with your wireless access
™
method active and try again.
™
,
™
and
™
enabled are
42