Store Numbers; Store Address Book Numbers; Change Or Delete Address Book Names Or Numbers - Brother MFC-J480DW User Manual

Store Numbers

You can set up your machine to store fax
numbers in the Address Book.
If you lose electrical power, the Address
Book numbers that are in the machine's
memory will not be lost.
Store Address Book
Numbers
You can store up to 40 two-digit Speed Dial
codes, and each code has a name.
1
Press (Address Book).
2
Press a or b to select [Set Speed
Dial] and then press OK.
3
Do the following steps:
a. Press a or b to select the two-digit
Speed Dial code where you want to
store the number. Press OK.
b. Enter the name (up to 16 characters)
using the dial pad. Press OK.
c. Enter the fax or telephone number
(up to 20 digits). Press OK.
• Press Redial/Pause to insert a pause
between numbers. You can press
Redial/Pause as many times as
needed to increase the length of the
pause.
d. Press a or b to select [Complete]
and then press OK.
To store another Speed Dial code,
repeat these steps.
4
Press Stop/Exit.
Change or Delete Address
Book Names or Numbers
You can change or delete an Address Book
name or number that has already been
stored.
1
Press (Address Book).
2
Press a or b to select [Set Speed
Dial] and then press OK.
3
Press a or b to select the following:
a. Select the two-digit Speed Dial code
where you want to change the
number. Press OK.
b. Select [Change]. Press OK.
To delete the number, select [Delete]
and then press OK. Press 1 [Yes] to
confirm.
4
Do one of the following:
• To change the name, press a or b to
select [Name] and then press OK.
Enter the name (up to 16 characters)
using the dial pad. Press OK.
• To change the fax or telephone
number, press a or b to select [Fax/
Tel], and then press OK. Enter the
fax or telephone number (up to 20
digits). Press OK.
How to change the stored name or
number:
To change a character, press d or c to
position the cursor to under the character
you want to change, and then press
Clear. Enter the new character.
5
Press a or b to select [Complete] and
then press OK to finish.
6
Press Stop/Exit.
24